Écran noir après chaque mise à jour de noyau

Assistance concernant Linux Mint
Proton88
Messages : 8
Enregistré le : sam. 21 oct. 2017 09:58
Localisation : Darnieulles (88150)
Contact :

Écran noir après chaque mise à jour de noyau

Message par Proton88 »

Bonjour,

Je rencontre un phénomène bizarre, que je crois lié aux mises à jour de noyaux, je poste dans Cinnamon mais j'ai longtemps hésité...
Après chaque mise à jour de noyau, après identification, j'ai un écran noir. En général, je fais ctrl-alt-f1 pour ouvrir une console, sudo reboot, puis tout rentre dans l'ordre. Ce n'est donc pas bloquant, mais un peu casse-pieds, et ça fait un bon moment que je cherche d'où ça peut venir. Et là où c'est marrant, c'est qu'il va falloir attendre le prochain noyau pour reproduire le phénomène.

Voici mon Xorg.0.log

Code : Tout sélectionner

[     5.237] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[     5.237] X Protocol Version 11, Revision 0
[     5.237] Build Operating System: Linux 4.4.0-97-generic x86_64 Ubuntu
[     5.237] Current Operating System: Linux ppn 4.4.0-97-generic #120-Ubuntu SMP Tue Sep 19 17:28:18 UTC 2017 x86_64
[     5.237] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-97-generic root=UUID=575d0ba1-118b-49b7-bf07-0ae2f5474e31 ro quiet splash vt.handoff=7
[     5.237] Build Date: 13 October 2017  01:57:05PM
[     5.237] xorg-server 2:1.18.4-0ubuntu0.7 (For technical support please see http://www.ubuntu.com/support) 
[     5.237] Current version of pixman: 0.33.6
[     5.237] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.237] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.237] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 21 09:32:00 2017
[     5.257] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.259] (==) No Layout section.  Using the first Screen section.
[     5.259] (==) No screen section available. Using defaults.
[     5.259] (**) |-->Screen "Default Screen Section" (0)
[     5.259] (**) |   |-->Monitor "<default monitor>"
[     5.261] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     5.261] (==) Automatically adding devices
[     5.261] (==) Automatically enabling devices
[     5.261] (==) Automatically adding GPU devices
[     5.261] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.261] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     5.261] 	Entry deleted from font path.
[     5.261] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     5.261] 	Entry deleted from font path.
[     5.261] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     5.261] 	Entry deleted from font path.
[     5.261] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[     5.261] 	Entry deleted from font path.
[     5.261] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     5.261] 	Entry deleted from font path.
[     5.261] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[     5.261] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     5.261] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.261] (II) Loader magic: 0x5619841badc0
[     5.261] (II) Module ABI versions:
[     5.261] 	X.Org ANSI C Emulation: 0.4
[     5.261] 	X.Org Video Driver: 20.0
[     5.261] 	X.Org XInput driver : 22.1
[     5.261] 	X.Org Server Extension : 9.0
[     5.261] (++) using VT number 7

[     5.261] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     5.262] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.262] (--) PCI:*(0:1:0:0) 10de:0fc8:1462:8a9e rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[     5.262] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[     5.262] (II) "glx" will be loaded by default.
[     5.262] (II) LoadModule: "glx"
[     5.262] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[     5.589] (II) Module glx: vendor="NVIDIA Corporation"
[     5.589] 	compiled for 4.0.2, module version = 1.0.0
[     5.589] 	Module class: X.Org Server Extension
[     5.589] (II) NVIDIA GLX Module  375.66  Mon May  1 14:28:39 PDT 2017
[     5.589] (==) Matched nvidia as autoconfigured driver 0
[     5.589] (==) Matched nouveau as autoconfigured driver 1
[     5.589] (==) Matched nvidia as autoconfigured driver 2
[     5.589] (==) Matched nouveau as autoconfigured driver 3
[     5.589] (==) Matched modesetting as autoconfigured driver 4
[     5.589] (==) Matched fbdev as autoconfigured driver 5
[     5.589] (==) Matched vesa as autoconfigured driver 6
[     5.589] (==) Assigned the driver to the xf86ConfigLayout
[     5.589] (II) LoadModule: "nvidia"
[     5.589] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[     5.623] (II) Module nvidia: vendor="NVIDIA Corporation"
[     5.623] 	compiled for 4.0.2, module version = 1.0.0
[     5.623] 	Module class: X.Org Video Driver
[     5.623] (II) LoadModule: "nouveau"
[     5.625] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[     5.648] (II) Module nouveau: vendor="X.Org Foundation"
[     5.648] 	compiled for 1.18.1, module version = 1.0.12
[     5.648] 	Module class: X.Org Video Driver
[     5.648] 	ABI class: X.Org Video Driver, version 20.0
[     5.648] (II) LoadModule: "modesetting"
[     5.648] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.648] (II) Module modesetting: vendor="X.Org Foundation"
[     5.648] 	compiled for 1.18.4, module version = 1.18.4
[     5.648] 	Module class: X.Org Video Driver
[     5.648] 	ABI class: X.Org Video Driver, version 20.0
[     5.648] (II) LoadModule: "fbdev"
[     5.648] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     5.648] (II) Module fbdev: vendor="X.Org Foundation"
[     5.648] 	compiled for 1.18.1, module version = 0.4.4
[     5.648] 	Module class: X.Org Video Driver
[     5.648] 	ABI class: X.Org Video Driver, version 20.0
[     5.648] (II) LoadModule: "vesa"
[     5.648] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     5.648] (II) Module vesa: vendor="X.Org Foundation"
[     5.648] 	compiled for 1.18.1, module version = 2.3.4
[     5.648] 	Module class: X.Org Video Driver
[     5.648] 	ABI class: X.Org Video Driver, version 20.0
[     5.648] (II) NVIDIA dlloader X Driver  375.66  Mon May  1 14:03:26 PDT 2017
[     5.648] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     5.652] (II) NOUVEAU driver Date:   Tue Dec 8 15:52:25 2015 +1000
[     5.652] (II) NOUVEAU driver for NVIDIA chipset families :
[     5.652] 	RIVA TNT        (NV04)
[     5.652] 	RIVA TNT2       (NV05)
[     5.652] 	GeForce 256     (NV10)
[     5.652] 	GeForce 2       (NV11, NV15)
[     5.652] 	GeForce 4MX     (NV17, NV18)
[     5.652] 	GeForce 3       (NV20)
[     5.652] 	GeForce 4Ti     (NV25, NV28)
[     5.652] 	GeForce FX      (NV3x)
[     5.652] 	GeForce 6       (NV4x)
[     5.652] 	GeForce 7       (G7x)
[     5.652] 	GeForce 8       (G8x)
[     5.652] 	GeForce GTX 200 (NVA0)
[     5.652] 	GeForce GTX 400 (NVC0)
[     5.652] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     5.652] (II) FBDEV: driver for framebuffer: fbdev
[     5.652] (II) VESA: driver for VESA chipsets: vesa
[     5.668] (II) Loading sub module "fb"
[     5.668] (II) LoadModule: "fb"
[     5.668] (II) Loading /usr/lib/xorg/modules/libfb.so
[     5.674] (II) Module fb: vendor="X.Org Foundation"
[     5.674] 	compiled for 1.18.4, module version = 1.0.0
[     5.674] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.674] (II) Loading sub module "wfb"
[     5.674] (II) LoadModule: "wfb"
[     5.674] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     5.684] (II) Module wfb: vendor="X.Org Foundation"
[     5.684] 	compiled for 1.18.4, module version = 1.0.0
[     5.684] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.684] (II) Loading sub module "ramdac"
[     5.684] (II) LoadModule: "ramdac"
[     5.684] (II) Module "ramdac" already built-in
[     5.710] (WW) Falling back to old probe method for modesetting
[     5.710] (WW) Falling back to old probe method for fbdev
[     5.710] (II) Loading sub module "fbdevhw"
[     5.710] (II) LoadModule: "fbdevhw"
[     5.710] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     5.710] (II) Module fbdevhw: vendor="X.Org Foundation"
[     5.710] 	compiled for 1.18.4, module version = 0.0.2
[     5.710] 	ABI class: X.Org Video Driver, version 20.0
[     5.710] (WW) Falling back to old probe method for vesa
[     5.710] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     5.710] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[     5.710] (==) NVIDIA(0): RGB weight 888
[     5.710] (==) NVIDIA(0): Default visual is TrueColor
[     5.710] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     5.721] (**) NVIDIA(0): Enabling 2D acceleration
[     5.986] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[     5.986] (--) NVIDIA(0):     CRT-0
[     5.986] (--) NVIDIA(0):     DFP-0
[     5.986] (--) NVIDIA(0):     DFP-1 (boot)
[     5.987] (II) NVIDIA(0): NVIDIA GPU GeForce GT 740 (GK107) at PCI:1:0:0 (GPU-0)
[     5.987] (--) NVIDIA(0): Memory: 2097152 kBytes
[     5.987] (--) NVIDIA(0): VideoBIOS: 80.07.df.00.09
[     5.987] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     5.988] (--) NVIDIA(GPU-0): CRT-0: disconnected
[     5.988] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[     5.988] (--) NVIDIA(GPU-0): 
[     5.988] (--) NVIDIA(GPU-0): DFP-0: disconnected
[     5.988] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[     5.988] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[     5.988] (--) NVIDIA(GPU-0): 
[     5.999] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[     5.999] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[     5.999] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[     5.999] (--) NVIDIA(GPU-0): 
[     6.000] (==) NVIDIA(0): 
[     6.000] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[     6.000] (==) NVIDIA(0):     will be used as the requested mode.
[     6.000] (==) NVIDIA(0): 
[     6.000] (II) NVIDIA(0): Validated MetaModes:
[     6.000] (II) NVIDIA(0):     "DFP-1:nvidia-auto-select"
[     6.000] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1440
[     6.004] (--) NVIDIA(0): DPI set to (91, 91); computed from "UseEdidDpi" X config
[     6.004] (--) NVIDIA(0):     option
[     6.004] (II) UnloadModule: "nouveau"
[     6.004] (II) Unloading nouveau
[     6.004] (II) UnloadModule: "modesetting"
[     6.004] (II) Unloading modesetting
[     6.004] (II) UnloadModule: "fbdev"
[     6.004] (II) Unloading fbdev
[     6.005] (II) UnloadSubModule: "fbdevhw"
[     6.005] (II) Unloading fbdevhw
[     6.005] (II) UnloadModule: "vesa"
[     6.005] (II) Unloading vesa
[     6.005] (--) Depth 24 pixmap format is 32 bpp
[     6.005] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[     6.005] (II) NVIDIA:     access.
[     6.060] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[     6.125] (==) NVIDIA(0): Disabling shared memory pixmaps
[     6.125] (==) NVIDIA(0): Backing store enabled
[     6.125] (==) NVIDIA(0): Silken mouse enabled
[     6.139] (==) NVIDIA(0): DPMS enabled
[     6.139] (II) Loading sub module "dri2"
[     6.139] (II) LoadModule: "dri2"
[     6.139] (II) Module "dri2" already built-in
[     6.139] (II) NVIDIA(0): [DRI2] Setup complete
[     6.139] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     6.144] (--) RandR disabled
[     6.149] (II) SELinux: Disabled on system
[     6.151] (II) Initializing extension GLX
[     6.151] (II) Indirect GLX disabled.
[     6.234] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     6.234] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     6.234] (II) LoadModule: "evdev"
[     6.234] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     6.234] (II) Module evdev: vendor="X.Org Foundation"
[     6.234] 	compiled for 1.18.1, module version = 2.10.1
[     6.234] 	Module class: X.Org XInput Driver
[     6.234] 	ABI class: X.Org XInput driver, version 22.1
[     6.234] (II) Using input driver 'evdev' for 'Power Button'
[     6.234] (**) Power Button: always reports core events
[     6.234] (**) evdev: Power Button: Device: "/dev/input/event2"
[     6.234] (--) evdev: Power Button: Vendor 0 Product 0x1
[     6.234] (--) evdev: Power Button: Found keys
[     6.234] (II) evdev: Power Button: Configuring as keyboard
[     6.234] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     6.234] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     6.234] (**) Option "xkb_rules" "evdev"
[     6.234] (**) Option "xkb_model" "pc105"
[     6.234] (**) Option "xkb_layout" "fr"
[     6.234] (**) Option "xkb_variant" "latin9"
[     6.242] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     6.242] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     6.242] (II) Using input driver 'evdev' for 'Power Button'
[     6.242] (**) Power Button: always reports core events
[     6.242] (**) evdev: Power Button: Device: "/dev/input/event1"
[     6.242] (--) evdev: Power Button: Vendor 0 Product 0x1
[     6.242] (--) evdev: Power Button: Found keys
[     6.242] (II) evdev: Power Button: Configuring as keyboard
[     6.242] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     6.242] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     6.242] (**) Option "xkb_rules" "evdev"
[     6.242] (**) Option "xkb_model" "pc105"
[     6.242] (**) Option "xkb_layout" "fr"
[     6.242] (**) Option "xkb_variant" "latin9"
[     6.242] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[     6.242] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     6.242] (II) Using input driver 'evdev' for 'Sleep Button'
[     6.242] (**) Sleep Button: always reports core events
[     6.242] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[     6.242] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     6.242] (--) evdev: Sleep Button: Found keys
[     6.242] (II) evdev: Sleep Button: Configuring as keyboard
[     6.242] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[     6.242] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     6.242] (**) Option "xkb_rules" "evdev"
[     6.242] (**) Option "xkb_model" "pc105"
[     6.242] (**) Option "xkb_layout" "fr"
[     6.242] (**) Option "xkb_variant" "latin9"
[     6.243] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
[     6.243] (II) No input driver specified, ignoring this device.
[     6.243] (II) This device may have been added with another device file.
[     6.243] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[     6.243] (II) No input driver specified, ignoring this device.
[     6.243] (II) This device may have been added with another device file.
[     6.243] (II) config/udev: Adding input device USB2.0 UVC PC Camera (/dev/input/event10)
[     6.243] (**) USB2.0 UVC PC Camera: Applying InputClass "evdev keyboard catchall"
[     6.243] (II) Using input driver 'evdev' for 'USB2.0 UVC PC Camera'
[     6.243] (**) USB2.0 UVC PC Camera: always reports core events
[     6.243] (**) evdev: USB2.0 UVC PC Camera: Device: "/dev/input/event10"
[     6.243] (--) evdev: USB2.0 UVC PC Camera: Vendor 0x1871 Product 0x7670
[     6.243] (--) evdev: USB2.0 UVC PC Camera: Found keys
[     6.243] (II) evdev: USB2.0 UVC PC Camera: Configuring as keyboard
[     6.243] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.1/1-10.1.1/1-10.1.1:1.0/input/input13/event10"
[     6.243] (II) XINPUT: Adding extended input device "USB2.0 UVC PC Camera" (type: KEYBOARD, id 9)
[     6.243] (**) Option "xkb_rules" "evdev"
[     6.243] (**) Option "xkb_model" "pc105"
[     6.243] (**) Option "xkb_layout" "fr"
[     6.243] (**) Option "xkb_variant" "latin9"
[     6.243] (II) config/udev: Adding input device HD Webcam C525 (/dev/input/event11)
[     6.243] (**) HD Webcam C525: Applying InputClass "evdev keyboard catchall"
[     6.243] (II) Using input driver 'evdev' for 'HD Webcam C525'
[     6.243] (**) HD Webcam C525: always reports core events
[     6.243] (**) evdev: HD Webcam C525: Device: "/dev/input/event11"
[     6.243] (--) evdev: HD Webcam C525: Vendor 0x46d Product 0x826
[     6.243] (--) evdev: HD Webcam C525: Found keys
[     6.243] (II) evdev: HD Webcam C525: Configuring as keyboard
[     6.243] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.2/1-10.2:1.2/input/input14/event11"
[     6.243] (II) XINPUT: Adding extended input device "HD Webcam C525" (type: KEYBOARD, id 10)
[     6.243] (**) Option "xkb_rules" "evdev"
[     6.243] (**) Option "xkb_model" "pc105"
[     6.243] (**) Option "xkb_layout" "fr"
[     6.243] (**) Option "xkb_variant" "latin9"
[     6.244] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[     6.244] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[     6.244] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[     6.244] (**) Logitech USB Receiver: always reports core events
[     6.244] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[     6.244] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[     6.244] (--) evdev: Logitech USB Receiver: Found keys
[     6.244] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[     6.244] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:046D:C517.0001/input/input6/event3"
[     6.244] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[     6.244] (**) Option "xkb_rules" "evdev"
[     6.244] (**) Option "xkb_model" "pc105"
[     6.244] (**) Option "xkb_layout" "fr"
[     6.244] (**) Option "xkb_variant" "latin9"
[     6.244] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[     6.244] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[     6.244] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[     6.244] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[     6.244] (**) Logitech USB Receiver: always reports core events
[     6.244] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event4"
[     6.244] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[     6.244] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[     6.244] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[     6.244] (--) evdev: Logitech USB Receiver: Found relative axes
[     6.244] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[     6.244] (--) evdev: Logitech USB Receiver: Found absolute axes
[     6.244] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[     6.244] (--) evdev: Logitech USB Receiver: Found keys
[     6.244] (II) evdev: Logitech USB Receiver: Configuring as mouse
[     6.244] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[     6.244] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[     6.244] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[     6.244] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     6.244] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:046D:C517.0002/input/input7/event4"
[     6.244] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
[     6.244] (**) Option "xkb_rules" "evdev"
[     6.244] (**) Option "xkb_model" "pc105"
[     6.244] (**) Option "xkb_layout" "fr"
[     6.244] (**) Option "xkb_variant" "latin9"
[     6.244] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[     6.244] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[     6.244] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[     6.244] (**) Logitech USB Receiver: (accel) acceleration profile 0
[     6.244] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[     6.244] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[     6.245] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[     6.245] (II) No input driver specified, ignoring this device.
[     6.245] (II) This device may have been added with another device file.
[     6.245] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event7)
[     6.245] (II) No input driver specified, ignoring this device.
[     6.245] (II) This device may have been added with another device file.
[     6.245] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event8)
[     6.245] (II) No input driver specified, ignoring this device.
[     6.245] (II) This device may have been added with another device file.
[     6.245] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event9)
[     6.245] (II) No input driver specified, ignoring this device.
[     6.245] (II) This device may have been added with another device file.
[     6.245] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event5)
[     6.245] (II) No input driver specified, ignoring this device.
[     6.245] (II) This device may have been added with another device file.
[     6.245] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
[     6.245] (II) No input driver specified, ignoring this device.
[     6.245] (II) This device may have been added with another device file.
[     6.245] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event12)
[     6.245] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     6.245] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[     6.245] (**) Eee PC WMI hotkeys: always reports core events
[     6.245] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event12"
[     6.245] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[     6.245] (--) evdev: Eee PC WMI hotkeys: Found keys
[     6.245] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[     6.245] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input15/event12"
[     6.245] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 13)
[     6.245] (**) Option "xkb_rules" "evdev"
[     6.245] (**) Option "xkb_model" "pc105"
[     6.245] (**) Option "xkb_layout" "fr"
[     6.245] (**) Option "xkb_variant" "latin9"
[    21.858] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    21.858] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    21.858] (--) NVIDIA(GPU-0): 
[    21.858] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    21.858] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    21.858] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    21.858] (--) NVIDIA(GPU-0): 
[    21.877] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[    21.877] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[    21.877] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[    21.877] (--) NVIDIA(GPU-0): 
[    21.977] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    21.977] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    21.977] (--) NVIDIA(GPU-0): 
[    21.977] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    21.978] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    21.978] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    21.978] (--) NVIDIA(GPU-0): 
[    21.995] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[    21.995] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[    21.995] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[    21.995] (--) NVIDIA(GPU-0): 
[    21.997] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    21.997] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    21.997] (--) NVIDIA(GPU-0): 
[    21.997] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    21.997] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    21.997] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    21.997] (--) NVIDIA(GPU-0): 
[    22.015] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[    22.015] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[    22.015] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[    22.015] (--) NVIDIA(GPU-0): 
[    22.016] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    22.016] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    22.016] (--) NVIDIA(GPU-0): 
[    22.016] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    22.016] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    22.016] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    22.016] (--) NVIDIA(GPU-0): 
[    22.034] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[    22.034] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[    22.034] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[    22.034] (--) NVIDIA(GPU-0): 
[    22.071] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    22.071] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    22.071] (--) NVIDIA(GPU-0): 
[    22.071] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    22.071] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    22.071] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    22.071] (--) NVIDIA(GPU-0): 
[    22.083] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[    22.083] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[    22.083] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[    22.083] (--) NVIDIA(GPU-0): 
[    23.848] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    23.848] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    23.848] (--) NVIDIA(GPU-0): 
[    23.848] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    23.848] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    23.848] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    23.848] (--) NVIDIA(GPU-0): 
[    23.866] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[    23.866] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[    23.866] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[    23.866] (--) NVIDIA(GPU-0): 
Et maintenant le Xorg.0.log.old...

Code : Tout sélectionner

[     4.919] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[     4.919] X Protocol Version 11, Revision 0
[     4.919] Build Operating System: Linux 4.4.0-97-generic x86_64 Ubuntu
[     4.919] Current Operating System: Linux ppn 4.4.0-97-generic #120-Ubuntu SMP Tue Sep 19 17:28:18 UTC 2017 x86_64
[     4.919] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-97-generic root=UUID=575d0ba1-118b-49b7-bf07-0ae2f5474e31 ro quiet splash vt.handoff=7
[     4.919] Build Date: 13 October 2017  01:57:05PM
[     4.919] xorg-server 2:1.18.4-0ubuntu0.7 (For technical support please see http://www.ubuntu.com/support) 
[     4.919] Current version of pixman: 0.33.6
[     4.919] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     4.919] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     4.919] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 21 08:50:19 2017
[     4.957] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     4.965] (==) No Layout section.  Using the first Screen section.
[     4.965] (==) No screen section available. Using defaults.
[     4.965] (**) |-->Screen "Default Screen Section" (0)
[     4.965] (**) |   |-->Monitor "<default monitor>"
[     4.971] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     4.971] (==) Automatically adding devices
[     4.971] (==) Automatically enabling devices
[     4.971] (==) Automatically adding GPU devices
[     4.971] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.002] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     5.002] 	Entry deleted from font path.
[     5.002] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     5.002] 	Entry deleted from font path.
[     5.002] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     5.002] 	Entry deleted from font path.
[     5.003] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[     5.003] 	Entry deleted from font path.
[     5.003] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     5.003] 	Entry deleted from font path.
[     5.003] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[     5.003] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     5.003] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.003] (II) Loader magic: 0x561805b60dc0
[     5.003] (II) Module ABI versions:
[     5.003] 	X.Org ANSI C Emulation: 0.4
[     5.003] 	X.Org Video Driver: 20.0
[     5.003] 	X.Org XInput driver : 22.1
[     5.003] 	X.Org Server Extension : 9.0
[     5.003] (++) using VT number 7

[     5.003] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     5.004] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.004] (--) PCI:*(0:1:0:0) 10de:0fc8:1462:8a9e rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[     5.004] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[     5.004] (II) "glx" will be loaded by default.
[     5.004] (II) LoadModule: "glx"
[     5.004] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[     5.316] (II) Module glx: vendor="NVIDIA Corporation"
[     5.316] 	compiled for 4.0.2, module version = 1.0.0
[     5.316] 	Module class: X.Org Server Extension
[     5.316] (II) NVIDIA GLX Module  375.66  Mon May  1 14:28:39 PDT 2017
[     5.316] (==) Matched nvidia as autoconfigured driver 0
[     5.316] (==) Matched nouveau as autoconfigured driver 1
[     5.316] (==) Matched nvidia as autoconfigured driver 2
[     5.316] (==) Matched nouveau as autoconfigured driver 3
[     5.316] (==) Matched modesetting as autoconfigured driver 4
[     5.316] (==) Matched fbdev as autoconfigured driver 5
[     5.316] (==) Matched vesa as autoconfigured driver 6
[     5.316] (==) Assigned the driver to the xf86ConfigLayout
[     5.316] (II) LoadModule: "nvidia"
[     5.316] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[     5.339] (II) Module nvidia: vendor="NVIDIA Corporation"
[     5.340] 	compiled for 4.0.2, module version = 1.0.0
[     5.340] 	Module class: X.Org Video Driver
[     5.340] (II) LoadModule: "nouveau"
[     5.344] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[     5.355] (II) Module nouveau: vendor="X.Org Foundation"
[     5.355] 	compiled for 1.18.1, module version = 1.0.12
[     5.355] 	Module class: X.Org Video Driver
[     5.355] 	ABI class: X.Org Video Driver, version 20.0
[     5.355] (II) LoadModule: "modesetting"
[     5.355] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.355] (II) Module modesetting: vendor="X.Org Foundation"
[     5.355] 	compiled for 1.18.4, module version = 1.18.4
[     5.355] 	Module class: X.Org Video Driver
[     5.355] 	ABI class: X.Org Video Driver, version 20.0
[     5.355] (II) LoadModule: "fbdev"
[     5.355] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     5.355] (II) Module fbdev: vendor="X.Org Foundation"
[     5.355] 	compiled for 1.18.1, module version = 0.4.4
[     5.355] 	Module class: X.Org Video Driver
[     5.355] 	ABI class: X.Org Video Driver, version 20.0
[     5.355] (II) LoadModule: "vesa"
[     5.355] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     5.355] (II) Module vesa: vendor="X.Org Foundation"
[     5.355] 	compiled for 1.18.1, module version = 2.3.4
[     5.355] 	Module class: X.Org Video Driver
[     5.355] 	ABI class: X.Org Video Driver, version 20.0
[     5.355] (II) NVIDIA dlloader X Driver  375.66  Mon May  1 14:03:26 PDT 2017
[     5.355] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     5.363] (II) NOUVEAU driver Date:   Tue Dec 8 15:52:25 2015 +1000
[     5.363] (II) NOUVEAU driver for NVIDIA chipset families :
[     5.363] 	RIVA TNT        (NV04)
[     5.363] 	RIVA TNT2       (NV05)
[     5.363] 	GeForce 256     (NV10)
[     5.363] 	GeForce 2       (NV11, NV15)
[     5.363] 	GeForce 4MX     (NV17, NV18)
[     5.363] 	GeForce 3       (NV20)
[     5.363] 	GeForce 4Ti     (NV25, NV28)
[     5.363] 	GeForce FX      (NV3x)
[     5.363] 	GeForce 6       (NV4x)
[     5.363] 	GeForce 7       (G7x)
[     5.363] 	GeForce 8       (G8x)
[     5.363] 	GeForce GTX 200 (NVA0)
[     5.363] 	GeForce GTX 400 (NVC0)
[     5.363] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     5.363] (II) FBDEV: driver for framebuffer: fbdev
[     5.363] (II) VESA: driver for VESA chipsets: vesa
[     5.379] (II) Loading sub module "fb"
[     5.379] (II) LoadModule: "fb"
[     5.379] (II) Loading /usr/lib/xorg/modules/libfb.so
[     5.384] (II) Module fb: vendor="X.Org Foundation"
[     5.384] 	compiled for 1.18.4, module version = 1.0.0
[     5.384] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.384] (II) Loading sub module "wfb"
[     5.384] (II) LoadModule: "wfb"
[     5.384] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     5.389] (II) Module wfb: vendor="X.Org Foundation"
[     5.389] 	compiled for 1.18.4, module version = 1.0.0
[     5.389] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.389] (II) Loading sub module "ramdac"
[     5.389] (II) LoadModule: "ramdac"
[     5.389] (II) Module "ramdac" already built-in
[     5.405] (WW) Falling back to old probe method for modesetting
[     5.405] (WW) Falling back to old probe method for fbdev
[     5.405] (II) Loading sub module "fbdevhw"
[     5.405] (II) LoadModule: "fbdevhw"
[     5.405] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     5.405] (II) Module fbdevhw: vendor="X.Org Foundation"
[     5.405] 	compiled for 1.18.4, module version = 0.0.2
[     5.405] 	ABI class: X.Org Video Driver, version 20.0
[     5.405] (WW) Falling back to old probe method for vesa
[     5.405] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     5.405] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[     5.405] (==) NVIDIA(0): RGB weight 888
[     5.405] (==) NVIDIA(0): Default visual is TrueColor
[     5.405] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     5.418] (**) NVIDIA(0): Enabling 2D acceleration
[     5.677] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[     5.677] (--) NVIDIA(0):     CRT-0
[     5.677] (--) NVIDIA(0):     DFP-0
[     5.677] (--) NVIDIA(0):     DFP-1 (boot)
[     5.678] (II) NVIDIA(0): NVIDIA GPU GeForce GT 740 (GK107) at PCI:1:0:0 (GPU-0)
[     5.678] (--) NVIDIA(0): Memory: 2097152 kBytes
[     5.678] (--) NVIDIA(0): VideoBIOS: 80.07.df.00.09
[     5.678] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     5.679] (--) NVIDIA(GPU-0): CRT-0: disconnected
[     5.679] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[     5.679] (--) NVIDIA(GPU-0): 
[     5.679] (--) NVIDIA(GPU-0): DFP-0: disconnected
[     5.679] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[     5.679] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[     5.679] (--) NVIDIA(GPU-0): 
[     5.690] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[     5.690] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[     5.690] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[     5.690] (--) NVIDIA(GPU-0): 
[     5.691] (==) NVIDIA(0): 
[     5.691] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[     5.691] (==) NVIDIA(0):     will be used as the requested mode.
[     5.691] (==) NVIDIA(0): 
[     5.692] (II) NVIDIA(0): Validated MetaModes:
[     5.692] (II) NVIDIA(0):     "DFP-1:nvidia-auto-select"
[     5.692] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1440
[     5.696] (--) NVIDIA(0): DPI set to (91, 91); computed from "UseEdidDpi" X config
[     5.696] (--) NVIDIA(0):     option
[     5.696] (II) UnloadModule: "nouveau"
[     5.696] (II) Unloading nouveau
[     5.696] (II) UnloadModule: "modesetting"
[     5.696] (II) Unloading modesetting
[     5.696] (II) UnloadModule: "fbdev"
[     5.696] (II) Unloading fbdev
[     5.696] (II) UnloadSubModule: "fbdevhw"
[     5.696] (II) Unloading fbdevhw
[     5.696] (II) UnloadModule: "vesa"
[     5.696] (II) Unloading vesa
[     5.696] (--) Depth 24 pixmap format is 32 bpp
[     5.696] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[     5.696] (II) NVIDIA:     access.
[     5.733] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[     5.803] (==) NVIDIA(0): Disabling shared memory pixmaps
[     5.803] (==) NVIDIA(0): Backing store enabled
[     5.803] (==) NVIDIA(0): Silken mouse enabled
[     5.809] (==) NVIDIA(0): DPMS enabled
[     5.809] (II) Loading sub module "dri2"
[     5.809] (II) LoadModule: "dri2"
[     5.809] (II) Module "dri2" already built-in
[     5.809] (II) NVIDIA(0): [DRI2] Setup complete
[     5.809] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     5.814] (--) RandR disabled
[     5.817] (II) SELinux: Disabled on system
[     5.819] (II) Initializing extension GLX
[     5.819] (II) Indirect GLX disabled.
[     5.939] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     5.939] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     5.939] (II) LoadModule: "evdev"
[     5.940] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     5.940] (II) Module evdev: vendor="X.Org Foundation"
[     5.940] 	compiled for 1.18.1, module version = 2.10.1
[     5.940] 	Module class: X.Org XInput Driver
[     5.940] 	ABI class: X.Org XInput driver, version 22.1
[     5.940] (II) Using input driver 'evdev' for 'Power Button'
[     5.940] (**) Power Button: always reports core events
[     5.940] (**) evdev: Power Button: Device: "/dev/input/event2"
[     5.940] (--) evdev: Power Button: Vendor 0 Product 0x1
[     5.940] (--) evdev: Power Button: Found keys
[     5.940] (II) evdev: Power Button: Configuring as keyboard
[     5.940] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     5.940] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     5.940] (**) Option "xkb_rules" "evdev"
[     5.940] (**) Option "xkb_model" "pc105"
[     5.940] (**) Option "xkb_layout" "fr"
[     5.940] (**) Option "xkb_variant" "latin9"
[     5.948] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     5.948] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     5.948] (II) Using input driver 'evdev' for 'Power Button'
[     5.948] (**) Power Button: always reports core events
[     5.948] (**) evdev: Power Button: Device: "/dev/input/event1"
[     5.948] (--) evdev: Power Button: Vendor 0 Product 0x1
[     5.948] (--) evdev: Power Button: Found keys
[     5.948] (II) evdev: Power Button: Configuring as keyboard
[     5.948] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     5.948] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     5.948] (**) Option "xkb_rules" "evdev"
[     5.948] (**) Option "xkb_model" "pc105"
[     5.948] (**) Option "xkb_layout" "fr"
[     5.948] (**) Option "xkb_variant" "latin9"
[     5.948] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[     5.948] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     5.948] (II) Using input driver 'evdev' for 'Sleep Button'
[     5.948] (**) Sleep Button: always reports core events
[     5.948] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[     5.948] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     5.948] (--) evdev: Sleep Button: Found keys
[     5.948] (II) evdev: Sleep Button: Configuring as keyboard
[     5.948] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[     5.948] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     5.948] (**) Option "xkb_rules" "evdev"
[     5.948] (**) Option "xkb_model" "pc105"
[     5.948] (**) Option "xkb_layout" "fr"
[     5.948] (**) Option "xkb_variant" "latin9"
[     5.948] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
[     5.948] (II) No input driver specified, ignoring this device.
[     5.948] (II) This device may have been added with another device file.
[     5.948] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[     5.948] (II) No input driver specified, ignoring this device.
[     5.948] (II) This device may have been added with another device file.
[     5.949] (II) config/udev: Adding input device USB2.0 UVC PC Camera (/dev/input/event10)
[     5.949] (**) USB2.0 UVC PC Camera: Applying InputClass "evdev keyboard catchall"
[     5.949] (II) Using input driver 'evdev' for 'USB2.0 UVC PC Camera'
[     5.949] (**) USB2.0 UVC PC Camera: always reports core events
[     5.949] (**) evdev: USB2.0 UVC PC Camera: Device: "/dev/input/event10"
[     5.949] (--) evdev: USB2.0 UVC PC Camera: Vendor 0x1871 Product 0x7670
[     5.949] (--) evdev: USB2.0 UVC PC Camera: Found keys
[     5.949] (II) evdev: USB2.0 UVC PC Camera: Configuring as keyboard
[     5.949] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.1/1-10.1.1/1-10.1.1:1.0/input/input13/event10"
[     5.949] (II) XINPUT: Adding extended input device "USB2.0 UVC PC Camera" (type: KEYBOARD, id 9)
[     5.949] (**) Option "xkb_rules" "evdev"
[     5.949] (**) Option "xkb_model" "pc105"
[     5.949] (**) Option "xkb_layout" "fr"
[     5.949] (**) Option "xkb_variant" "latin9"
[     5.949] (II) config/udev: Adding input device HD Webcam C525 (/dev/input/event11)
[     5.949] (**) HD Webcam C525: Applying InputClass "evdev keyboard catchall"
[     5.949] (II) Using input driver 'evdev' for 'HD Webcam C525'
[     5.949] (**) HD Webcam C525: always reports core events
[     5.949] (**) evdev: HD Webcam C525: Device: "/dev/input/event11"
[     5.949] (--) evdev: HD Webcam C525: Vendor 0x46d Product 0x826
[     5.949] (--) evdev: HD Webcam C525: Found keys
[     5.949] (II) evdev: HD Webcam C525: Configuring as keyboard
[     5.949] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.2/1-10.2:1.2/input/input14/event11"
[     5.949] (II) XINPUT: Adding extended input device "HD Webcam C525" (type: KEYBOARD, id 10)
[     5.949] (**) Option "xkb_rules" "evdev"
[     5.949] (**) Option "xkb_model" "pc105"
[     5.949] (**) Option "xkb_layout" "fr"
[     5.949] (**) Option "xkb_variant" "latin9"
[     5.949] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[     5.949] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[     5.949] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[     5.949] (**) Logitech USB Receiver: always reports core events
[     5.949] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[     5.949] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[     5.949] (--) evdev: Logitech USB Receiver: Found keys
[     5.949] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[     5.949] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:046D:C517.0001/input/input6/event3"
[     5.949] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[     5.949] (**) Option "xkb_rules" "evdev"
[     5.949] (**) Option "xkb_model" "pc105"
[     5.949] (**) Option "xkb_layout" "fr"
[     5.949] (**) Option "xkb_variant" "latin9"
[     5.950] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[     5.950] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[     5.950] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[     5.950] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[     5.950] (**) Logitech USB Receiver: always reports core events
[     5.950] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event4"
[     5.950] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[     5.950] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[     5.950] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[     5.950] (--) evdev: Logitech USB Receiver: Found relative axes
[     5.950] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[     5.950] (--) evdev: Logitech USB Receiver: Found absolute axes
[     5.950] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[     5.950] (--) evdev: Logitech USB Receiver: Found keys
[     5.950] (II) evdev: Logitech USB Receiver: Configuring as mouse
[     5.950] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[     5.950] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[     5.950] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[     5.950] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     5.950] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:046D:C517.0002/input/input7/event4"
[     5.950] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
[     5.950] (**) Option "xkb_rules" "evdev"
[     5.950] (**) Option "xkb_model" "pc105"
[     5.950] (**) Option "xkb_layout" "fr"
[     5.950] (**) Option "xkb_variant" "latin9"
[     5.950] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[     5.950] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[     5.950] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[     5.950] (**) Logitech USB Receiver: (accel) acceleration profile 0
[     5.950] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[     5.950] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[     5.950] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[     5.950] (II) No input driver specified, ignoring this device.
[     5.950] (II) This device may have been added with another device file.
[     5.950] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event7)
[     5.950] (II) No input driver specified, ignoring this device.
[     5.950] (II) This device may have been added with another device file.
[     5.950] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event8)
[     5.950] (II) No input driver specified, ignoring this device.
[     5.951] (II) This device may have been added with another device file.
[     5.951] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event9)
[     5.951] (II) No input driver specified, ignoring this device.
[     5.951] (II) This device may have been added with another device file.
[     5.951] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event5)
[     5.951] (II) No input driver specified, ignoring this device.
[     5.951] (II) This device may have been added with another device file.
[     5.951] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
[     5.951] (II) No input driver specified, ignoring this device.
[     5.951] (II) This device may have been added with another device file.
[     5.951] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event12)
[     5.951] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     5.951] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[     5.951] (**) Eee PC WMI hotkeys: always reports core events
[     5.951] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event12"
[     5.951] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[     5.951] (--) evdev: Eee PC WMI hotkeys: Found keys
[     5.951] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[     5.951] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input15/event12"
[     5.951] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 13)
[     5.951] (**) Option "xkb_rules" "evdev"
[     5.951] (**) Option "xkb_model" "pc105"
[     5.951] (**) Option "xkb_layout" "fr"
[     5.951] (**) Option "xkb_variant" "latin9"
[     6.638] (--) NVIDIA(GPU-0): DFP-1: disconnected
[     6.638] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[     6.638] (--) NVIDIA(GPU-0): DFP-1: 340.0 MHz maximum pixel clock
[     6.638] (--) NVIDIA(GPU-0): 
[     8.089] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[     8.089] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[     8.089] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[     8.089] (--) NVIDIA(GPU-0): 
[   175.763] (--) NVIDIA(GPU-0): CRT-0: disconnected
[   175.763] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   175.763] (--) NVIDIA(GPU-0): 
[   175.763] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   175.763] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   175.763] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   175.763] (--) NVIDIA(GPU-0): 
[   175.781] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[   175.781] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[   175.781] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[   175.781] (--) NVIDIA(GPU-0): 
[   175.875] (--) NVIDIA(GPU-0): CRT-0: disconnected
[   175.875] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   175.875] (--) NVIDIA(GPU-0): 
[   175.875] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   175.875] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   175.875] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   175.875] (--) NVIDIA(GPU-0): 
[   175.893] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[   175.893] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[   175.893] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[   175.893] (--) NVIDIA(GPU-0): 
[   175.894] (--) NVIDIA(GPU-0): CRT-0: disconnected
[   175.894] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   175.894] (--) NVIDIA(GPU-0): 
[   175.894] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   175.894] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   175.894] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   175.894] (--) NVIDIA(GPU-0): 
[   175.912] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[   175.912] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[   175.912] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[   175.912] (--) NVIDIA(GPU-0): 
[   175.913] (--) NVIDIA(GPU-0): CRT-0: disconnected
[   175.913] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   175.913] (--) NVIDIA(GPU-0): 
[   175.913] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   175.913] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   175.913] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   175.913] (--) NVIDIA(GPU-0): 
[   175.931] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[   175.931] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[   175.931] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[   175.931] (--) NVIDIA(GPU-0): 
[   175.962] (II) NVIDIA(0): Setting mode "HDMI-0: nvidia-auto-select @2560x1440 +0+0 {ViewPortIn=2560x1440, ViewPortOut=2560x1440+0+0}"
[   175.993] (--) NVIDIA(GPU-0): CRT-0: disconnected
[   175.993] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   175.993] (--) NVIDIA(GPU-0): 
[   175.994] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   175.994] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   175.994] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   175.994] (--) NVIDIA(GPU-0): 
[   176.011] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[   176.011] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[   176.011] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[   176.011] (--) NVIDIA(GPU-0): 
[   179.418] (--) NVIDIA(GPU-0): CRT-0: disconnected
[   179.418] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   179.418] (--) NVIDIA(GPU-0): 
[   179.418] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   179.418] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   179.418] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   179.418] (--) NVIDIA(GPU-0): 
[   179.437] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[   179.437] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[   179.437] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[   179.437] (--) NVIDIA(GPU-0): 
[  2482.429] (II) evdev: Eee PC WMI hotkeys: Close
[  2482.429] (II) UnloadModule: "evdev"
[  2482.429] (II) evdev: Logitech USB Receiver: Close
[  2482.429] (II) UnloadModule: "evdev"
[  2482.429] (II) evdev: Logitech USB Receiver: Close
[  2482.429] (II) UnloadModule: "evdev"
[  2482.429] (II) evdev: HD Webcam C525: Close
[  2482.429] (II) UnloadModule: "evdev"
[  2482.429] (II) evdev: USB2.0 UVC PC Camera: Close
[  2482.429] (II) UnloadModule: "evdev"
[  2482.429] (II) evdev: Sleep Button: Close
[  2482.429] (II) UnloadModule: "evdev"
[  2482.429] (II) evdev: Power Button: Close
[  2482.429] (II) UnloadModule: "evdev"
[  2482.429] (II) evdev: Power Button: Close
[  2482.429] (II) UnloadModule: "evdev"
[  2482.457] (II) NVIDIA(GPU-0): Deleting GPU-0
[  2482.457] (II) Server terminated successfully (0). Closing log file.
Je ne sais pas vraiment où chercher, merci d'avance pour vos avis éclairés.

Stéphane
Linux Mint 18.3, Cinnamon 3.6.7, Noyau 4.4.0.104-generic x86_64
CM ASUS Z170-P, CPU i5-6600K, 8GB DDR4
NVIDIA GK107 (GT 740), pilote nvidia, Ecran HP Envy 32'' QHD
DD SanDisk SSD 240G (système) + Seagate 320G

zeb
Messages : 16473
Enregistré le : ven. 19 juin 2015 22:13
Localisation : plus ici

Re: Écran noir après chaque mise à jour de noyau

Message par zeb »

Re ;)
Ça ne fera pas évoluer ton souci, mais, les mises à jour noyaux sont classées en 4/5 et donc ne sont pas très recommandées pour les non initiés ;)
Je laisserai les docteurs te répondre et sûrement trouvés une soluc 8-)
Proton88 a écrit :je poste dans Cinnamon mais j'ai longtemps hésité...
A juste titre :D que tu sois sous cinnamon ou autre, la démarche sera la même ;)
Je déplace dans "générale"

Proton88
Messages : 8
Enregistré le : sam. 21 oct. 2017 09:58
Localisation : Darnieulles (88150)
Contact :

Re: Écran noir après chaque mise à jour de noyau

Message par Proton88 »

Bien le bonsoir,

Aujourd'hui le problème s'est reproduit quand j'ai démarré mon PC à midi: écran noir après identification. En rentrant ce soir, j'avais de l'image. Je n'avais cependant pas fait de mise à jour critique, ce n'est peut-être pas lié, finalement... Voici le Xorg.0.log

Code : Tout sélectionner

[     4.647] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[     4.647] X Protocol Version 11, Revision 0
[     4.647] Build Operating System: Linux 4.4.0-97-generic x86_64 Ubuntu
[     4.647] Current Operating System: Linux ppn 4.4.0-97-generic #120-Ubuntu SMP Tue Sep 19 17:28:18 UTC 2017 x86_64
[     4.647] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-97-generic root=UUID=575d0ba1-118b-49b7-bf07-0ae2f5474e31 ro quiet splash vt.handoff=7
[     4.647] Build Date: 13 October 2017  01:57:05PM
[     4.647] xorg-server 2:1.18.4-0ubuntu0.7 (For technical support please see http://www.ubuntu.com/support) 
[     4.647] Current version of pixman: 0.33.6
[     4.647] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     4.647] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     4.647] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 24 13:31:59 2017
[     4.666] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     4.667] (==) No Layout section.  Using the first Screen section.
[     4.667] (==) No screen section available. Using defaults.
[     4.667] (**) |-->Screen "Default Screen Section" (0)
[     4.667] (**) |   |-->Monitor "<default monitor>"
[     4.672] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     4.672] (==) Automatically adding devices
[     4.672] (==) Automatically enabling devices
[     4.672] (==) Automatically adding GPU devices
[     4.672] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     4.672] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     4.672] 	Entry deleted from font path.
[     4.672] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     4.672] 	Entry deleted from font path.
[     4.672] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     4.672] 	Entry deleted from font path.
[     4.672] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[     4.672] 	Entry deleted from font path.
[     4.672] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     4.672] 	Entry deleted from font path.
[     4.672] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[     4.672] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     4.672] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     4.672] (II) Loader magic: 0x55d5860fadc0
[     4.672] (II) Module ABI versions:
[     4.672] 	X.Org ANSI C Emulation: 0.4
[     4.672] 	X.Org Video Driver: 20.0
[     4.672] 	X.Org XInput driver : 22.1
[     4.672] 	X.Org Server Extension : 9.0
[     4.672] (++) using VT number 7

[     4.672] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     4.672] (II) xfree86: Adding drm device (/dev/dri/card0)
[     4.673] (--) PCI:*(0:1:0:0) 10de:0fc8:1462:8a9e rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[     4.673] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[     4.673] (II) "glx" will be loaded by default.
[     4.673] (II) LoadModule: "glx"
[     4.673] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[     4.903] (II) Module glx: vendor="NVIDIA Corporation"
[     4.903] 	compiled for 4.0.2, module version = 1.0.0
[     4.903] 	Module class: X.Org Server Extension
[     4.903] (II) NVIDIA GLX Module  375.66  Mon May  1 14:28:39 PDT 2017
[     4.903] (==) Matched nvidia as autoconfigured driver 0
[     4.903] (==) Matched nouveau as autoconfigured driver 1
[     4.903] (==) Matched nvidia as autoconfigured driver 2
[     4.903] (==) Matched nouveau as autoconfigured driver 3
[     4.903] (==) Matched modesetting as autoconfigured driver 4
[     4.903] (==) Matched fbdev as autoconfigured driver 5
[     4.903] (==) Matched vesa as autoconfigured driver 6
[     4.903] (==) Assigned the driver to the xf86ConfigLayout
[     4.903] (II) LoadModule: "nvidia"
[     4.903] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[     4.948] (II) Module nvidia: vendor="NVIDIA Corporation"
[     4.948] 	compiled for 4.0.2, module version = 1.0.0
[     4.948] 	Module class: X.Org Video Driver
[     4.948] (II) LoadModule: "nouveau"
[     4.951] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[     4.984] (II) Module nouveau: vendor="X.Org Foundation"
[     4.984] 	compiled for 1.18.1, module version = 1.0.12
[     4.984] 	Module class: X.Org Video Driver
[     4.984] 	ABI class: X.Org Video Driver, version 20.0
[     4.984] (II) LoadModule: "modesetting"
[     4.984] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     4.984] (II) Module modesetting: vendor="X.Org Foundation"
[     4.984] 	compiled for 1.18.4, module version = 1.18.4
[     4.984] 	Module class: X.Org Video Driver
[     4.984] 	ABI class: X.Org Video Driver, version 20.0
[     4.984] (II) LoadModule: "fbdev"
[     4.985] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     4.985] (II) Module fbdev: vendor="X.Org Foundation"
[     4.985] 	compiled for 1.18.1, module version = 0.4.4
[     4.985] 	Module class: X.Org Video Driver
[     4.985] 	ABI class: X.Org Video Driver, version 20.0
[     4.985] (II) LoadModule: "vesa"
[     4.985] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     4.985] (II) Module vesa: vendor="X.Org Foundation"
[     4.985] 	compiled for 1.18.1, module version = 2.3.4
[     4.985] 	Module class: X.Org Video Driver
[     4.985] 	ABI class: X.Org Video Driver, version 20.0
[     4.985] (II) NVIDIA dlloader X Driver  375.66  Mon May  1 14:03:26 PDT 2017
[     4.985] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     4.987] (II) NOUVEAU driver Date:   Tue Dec 8 15:52:25 2015 +1000
[     4.987] (II) NOUVEAU driver for NVIDIA chipset families :
[     4.987] 	RIVA TNT        (NV04)
[     4.987] 	RIVA TNT2       (NV05)
[     4.987] 	GeForce 256     (NV10)
[     4.987] 	GeForce 2       (NV11, NV15)
[     4.987] 	GeForce 4MX     (NV17, NV18)
[     4.987] 	GeForce 3       (NV20)
[     4.987] 	GeForce 4Ti     (NV25, NV28)
[     4.987] 	GeForce FX      (NV3x)
[     4.987] 	GeForce 6       (NV4x)
[     4.987] 	GeForce 7       (G7x)
[     4.987] 	GeForce 8       (G8x)
[     4.987] 	GeForce GTX 200 (NVA0)
[     4.987] 	GeForce GTX 400 (NVC0)
[     4.987] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     4.987] (II) FBDEV: driver for framebuffer: fbdev
[     4.987] (II) VESA: driver for VESA chipsets: vesa
[     4.998] (II) Loading sub module "fb"
[     4.998] (II) LoadModule: "fb"
[     4.998] (II) Loading /usr/lib/xorg/modules/libfb.so
[     4.998] (II) Module fb: vendor="X.Org Foundation"
[     4.998] 	compiled for 1.18.4, module version = 1.0.0
[     4.998] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     4.998] (II) Loading sub module "wfb"
[     4.998] (II) LoadModule: "wfb"
[     4.998] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     5.017] (II) Module wfb: vendor="X.Org Foundation"
[     5.017] 	compiled for 1.18.4, module version = 1.0.0
[     5.017] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.017] (II) Loading sub module "ramdac"
[     5.017] (II) LoadModule: "ramdac"
[     5.017] (II) Module "ramdac" already built-in
[     5.027] (WW) Falling back to old probe method for modesetting
[     5.027] (WW) Falling back to old probe method for fbdev
[     5.027] (II) Loading sub module "fbdevhw"
[     5.027] (II) LoadModule: "fbdevhw"
[     5.027] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     5.027] (II) Module fbdevhw: vendor="X.Org Foundation"
[     5.027] 	compiled for 1.18.4, module version = 0.0.2
[     5.027] 	ABI class: X.Org Video Driver, version 20.0
[     5.027] (WW) Falling back to old probe method for vesa
[     5.027] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     5.027] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[     5.027] (==) NVIDIA(0): RGB weight 888
[     5.027] (==) NVIDIA(0): Default visual is TrueColor
[     5.027] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     5.035] (**) NVIDIA(0): Enabling 2D acceleration
[     5.298] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[     5.298] (--) NVIDIA(0):     CRT-0
[     5.298] (--) NVIDIA(0):     DFP-0
[     5.298] (--) NVIDIA(0):     DFP-1 (boot)
[     5.298] (II) NVIDIA(0): NVIDIA GPU GeForce GT 740 (GK107) at PCI:1:0:0 (GPU-0)
[     5.298] (--) NVIDIA(0): Memory: 2097152 kBytes
[     5.298] (--) NVIDIA(0): VideoBIOS: 80.07.df.00.09
[     5.298] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     5.299] (--) NVIDIA(GPU-0): CRT-0: disconnected
[     5.299] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[     5.299] (--) NVIDIA(GPU-0): 
[     5.299] (--) NVIDIA(GPU-0): DFP-0: disconnected
[     5.299] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[     5.299] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[     5.299] (--) NVIDIA(GPU-0): 
[     5.311] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[     5.311] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[     5.311] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[     5.311] (--) NVIDIA(GPU-0): 
[     5.312] (==) NVIDIA(0): 
[     5.312] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[     5.312] (==) NVIDIA(0):     will be used as the requested mode.
[     5.312] (==) NVIDIA(0): 
[     5.312] (II) NVIDIA(0): Validated MetaModes:
[     5.312] (II) NVIDIA(0):     "DFP-1:nvidia-auto-select"
[     5.312] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1440
[     5.316] (--) NVIDIA(0): DPI set to (91, 91); computed from "UseEdidDpi" X config
[     5.316] (--) NVIDIA(0):     option
[     5.316] (II) UnloadModule: "nouveau"
[     5.316] (II) Unloading nouveau
[     5.316] (II) UnloadModule: "modesetting"
[     5.316] (II) Unloading modesetting
[     5.316] (II) UnloadModule: "fbdev"
[     5.316] (II) Unloading fbdev
[     5.316] (II) UnloadSubModule: "fbdevhw"
[     5.316] (II) Unloading fbdevhw
[     5.316] (II) UnloadModule: "vesa"
[     5.316] (II) Unloading vesa
[     5.316] (--) Depth 24 pixmap format is 32 bpp
[     5.317] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[     5.317] (II) NVIDIA:     access.
[     5.360] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[     5.412] (==) NVIDIA(0): Disabling shared memory pixmaps
[     5.412] (==) NVIDIA(0): Backing store enabled
[     5.412] (==) NVIDIA(0): Silken mouse enabled
[     5.419] (==) NVIDIA(0): DPMS enabled
[     5.419] (II) Loading sub module "dri2"
[     5.419] (II) LoadModule: "dri2"
[     5.419] (II) Module "dri2" already built-in
[     5.419] (II) NVIDIA(0): [DRI2] Setup complete
[     5.419] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     5.421] (--) RandR disabled
[     5.425] (II) SELinux: Disabled on system
[     5.425] (II) Initializing extension GLX
[     5.425] (II) Indirect GLX disabled.
[     5.553] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     5.553] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     5.553] (II) LoadModule: "evdev"
[     5.553] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     5.553] (II) Module evdev: vendor="X.Org Foundation"
[     5.553] 	compiled for 1.18.1, module version = 2.10.1
[     5.553] 	Module class: X.Org XInput Driver
[     5.553] 	ABI class: X.Org XInput driver, version 22.1
[     5.553] (II) Using input driver 'evdev' for 'Power Button'
[     5.553] (**) Power Button: always reports core events
[     5.553] (**) evdev: Power Button: Device: "/dev/input/event2"
[     5.553] (--) evdev: Power Button: Vendor 0 Product 0x1
[     5.553] (--) evdev: Power Button: Found keys
[     5.553] (II) evdev: Power Button: Configuring as keyboard
[     5.553] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     5.553] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     5.553] (**) Option "xkb_rules" "evdev"
[     5.553] (**) Option "xkb_model" "pc105"
[     5.553] (**) Option "xkb_layout" "fr"
[     5.553] (**) Option "xkb_variant" "latin9"
[     5.561] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     5.561] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     5.561] (II) Using input driver 'evdev' for 'Power Button'
[     5.561] (**) Power Button: always reports core events
[     5.561] (**) evdev: Power Button: Device: "/dev/input/event1"
[     5.561] (--) evdev: Power Button: Vendor 0 Product 0x1
[     5.561] (--) evdev: Power Button: Found keys
[     5.561] (II) evdev: Power Button: Configuring as keyboard
[     5.561] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     5.561] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     5.561] (**) Option "xkb_rules" "evdev"
[     5.561] (**) Option "xkb_model" "pc105"
[     5.561] (**) Option "xkb_layout" "fr"
[     5.561] (**) Option "xkb_variant" "latin9"
[     5.561] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[     5.561] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     5.561] (II) Using input driver 'evdev' for 'Sleep Button'
[     5.561] (**) Sleep Button: always reports core events
[     5.561] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[     5.561] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     5.561] (--) evdev: Sleep Button: Found keys
[     5.561] (II) evdev: Sleep Button: Configuring as keyboard
[     5.561] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[     5.561] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     5.561] (**) Option "xkb_rules" "evdev"
[     5.561] (**) Option "xkb_model" "pc105"
[     5.561] (**) Option "xkb_layout" "fr"
[     5.561] (**) Option "xkb_variant" "latin9"
[     5.562] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
[     5.562] (II) No input driver specified, ignoring this device.
[     5.562] (II) This device may have been added with another device file.
[     5.562] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[     5.562] (II) No input driver specified, ignoring this device.
[     5.562] (II) This device may have been added with another device file.
[     5.562] (II) config/udev: Adding input device USB2.0 UVC PC Camera (/dev/input/event5)
[     5.562] (**) USB2.0 UVC PC Camera: Applying InputClass "evdev keyboard catchall"
[     5.562] (II) Using input driver 'evdev' for 'USB2.0 UVC PC Camera'
[     5.562] (**) USB2.0 UVC PC Camera: always reports core events
[     5.562] (**) evdev: USB2.0 UVC PC Camera: Device: "/dev/input/event5"
[     5.562] (--) evdev: USB2.0 UVC PC Camera: Vendor 0x1871 Product 0x7670
[     5.562] (--) evdev: USB2.0 UVC PC Camera: Found keys
[     5.562] (II) evdev: USB2.0 UVC PC Camera: Configuring as keyboard
[     5.562] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.1/1-10.1.1/1-10.1.1:1.0/input/input8/event5"
[     5.562] (II) XINPUT: Adding extended input device "USB2.0 UVC PC Camera" (type: KEYBOARD, id 9)
[     5.562] (**) Option "xkb_rules" "evdev"
[     5.562] (**) Option "xkb_model" "pc105"
[     5.562] (**) Option "xkb_layout" "fr"
[     5.562] (**) Option "xkb_variant" "latin9"
[     5.562] (II) config/udev: Adding input device HD Webcam C525 (/dev/input/event6)
[     5.562] (**) HD Webcam C525: Applying InputClass "evdev keyboard catchall"
[     5.562] (II) Using input driver 'evdev' for 'HD Webcam C525'
[     5.563] (**) HD Webcam C525: always reports core events
[     5.563] (**) evdev: HD Webcam C525: Device: "/dev/input/event6"
[     5.563] (--) evdev: HD Webcam C525: Vendor 0x46d Product 0x826
[     5.563] (--) evdev: HD Webcam C525: Found keys
[     5.563] (II) evdev: HD Webcam C525: Configuring as keyboard
[     5.563] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.2/1-10.2:1.2/input/input9/event6"
[     5.563] (II) XINPUT: Adding extended input device "HD Webcam C525" (type: KEYBOARD, id 10)
[     5.563] (**) Option "xkb_rules" "evdev"
[     5.563] (**) Option "xkb_model" "pc105"
[     5.563] (**) Option "xkb_layout" "fr"
[     5.563] (**) Option "xkb_variant" "latin9"
[     5.563] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[     5.563] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[     5.563] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[     5.563] (**) Logitech USB Receiver: always reports core events
[     5.563] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[     5.563] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[     5.563] (--) evdev: Logitech USB Receiver: Found keys
[     5.563] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[     5.563] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:046D:C517.0001/input/input6/event3"
[     5.563] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[     5.563] (**) Option "xkb_rules" "evdev"
[     5.563] (**) Option "xkb_model" "pc105"
[     5.563] (**) Option "xkb_layout" "fr"
[     5.563] (**) Option "xkb_variant" "latin9"
[     5.563] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[     5.563] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[     5.563] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[     5.563] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[     5.563] (**) Logitech USB Receiver: always reports core events
[     5.563] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event4"
[     5.563] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[     5.563] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[     5.563] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[     5.563] (--) evdev: Logitech USB Receiver: Found relative axes
[     5.563] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[     5.563] (--) evdev: Logitech USB Receiver: Found absolute axes
[     5.563] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[     5.563] (--) evdev: Logitech USB Receiver: Found keys
[     5.563] (II) evdev: Logitech USB Receiver: Configuring as mouse
[     5.563] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[     5.563] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[     5.563] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[     5.563] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     5.563] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:046D:C517.0002/input/input7/event4"
[     5.563] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
[     5.563] (**) Option "xkb_rules" "evdev"
[     5.563] (**) Option "xkb_model" "pc105"
[     5.563] (**) Option "xkb_layout" "fr"
[     5.563] (**) Option "xkb_variant" "latin9"
[     5.563] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[     5.563] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[     5.564] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[     5.564] (**) Logitech USB Receiver: (accel) acceleration profile 0
[     5.564] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[     5.564] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[     5.564] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[     5.564] (II) No input driver specified, ignoring this device.
[     5.564] (II) This device may have been added with another device file.
[     5.564] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
[     5.564] (II) No input driver specified, ignoring this device.
[     5.564] (II) This device may have been added with another device file.
[     5.564] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event8)
[     5.564] (II) No input driver specified, ignoring this device.
[     5.564] (II) This device may have been added with another device file.
[     5.564] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event9)
[     5.564] (II) No input driver specified, ignoring this device.
[     5.564] (II) This device may have been added with another device file.
[     5.564] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event10)
[     5.564] (II) No input driver specified, ignoring this device.
[     5.564] (II) This device may have been added with another device file.
[     5.564] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[     5.564] (II) No input driver specified, ignoring this device.
[     5.564] (II) This device may have been added with another device file.
[     5.565] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event12)
[     5.565] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     5.565] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[     5.565] (**) Eee PC WMI hotkeys: always reports core events
[     5.565] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event12"
[     5.565] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[     5.565] (--) evdev: Eee PC WMI hotkeys: Found keys
[     5.565] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[     5.565] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input15/event12"
[     5.565] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 13)
[     5.565] (**) Option "xkb_rules" "evdev"
[     5.565] (**) Option "xkb_model" "pc105"
[     5.565] (**) Option "xkb_layout" "fr"
[     5.565] (**) Option "xkb_variant" "latin9"
[   612.696] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   612.696] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   612.696] (--) NVIDIA(GPU-0): DFP-1: 340.0 MHz maximum pixel clock
[   612.696] (--) NVIDIA(GPU-0): 
[   614.159] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[   614.159] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[   614.159] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[   614.159] (--) NVIDIA(GPU-0): 
[   812.326] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   812.326] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   812.326] (--) NVIDIA(GPU-0): DFP-1: 340.0 MHz maximum pixel clock
[   812.326] (--) NVIDIA(GPU-0): 
[   813.776] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[   813.776] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[   813.776] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[   813.776] (--) NVIDIA(GPU-0): 
[   820.046] (--) NVIDIA(GPU-0): CRT-0: disconnected
[   820.046] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   820.046] (--) NVIDIA(GPU-0): 
[   820.046] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   820.046] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   820.046] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   820.046] (--) NVIDIA(GPU-0): 
[   820.065] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[   820.065] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[   820.065] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[   820.065] (--) NVIDIA(GPU-0): 
[   820.156] (--) NVIDIA(GPU-0): CRT-0: disconnected
[   820.156] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   820.156] (--) NVIDIA(GPU-0): 
[   820.156] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   820.156] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   820.156] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   820.156] (--) NVIDIA(GPU-0): 
[   820.174] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[   820.174] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[   820.174] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[   820.174] (--) NVIDIA(GPU-0): 
[   820.175] (--) NVIDIA(GPU-0): CRT-0: disconnected
[   820.175] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   820.175] (--) NVIDIA(GPU-0): 
[   820.175] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   820.175] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   820.175] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   820.175] (--) NVIDIA(GPU-0): 
[   820.193] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[   820.193] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[   820.193] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[   820.193] (--) NVIDIA(GPU-0): 
[   820.194] (--) NVIDIA(GPU-0): CRT-0: disconnected
[   820.194] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   820.194] (--) NVIDIA(GPU-0): 
[   820.194] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   820.194] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   820.194] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   820.194] (--) NVIDIA(GPU-0): 
[   820.211] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[   820.212] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[   820.212] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[   820.212] (--) NVIDIA(GPU-0): 
[   820.238] (II) NVIDIA(0): Setting mode "HDMI-0: nvidia-auto-select @2560x1440 +0+0 {ViewPortIn=2560x1440, ViewPortOut=2560x1440+0+0}"
[   820.289] (--) NVIDIA(GPU-0): CRT-0: disconnected
[   820.289] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   820.289] (--) NVIDIA(GPU-0): 
[   820.289] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   820.289] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   820.289] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   820.289] (--) NVIDIA(GPU-0): 
[   820.307] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[   820.307] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[   820.307] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[   820.307] (--) NVIDIA(GPU-0): 
[   823.903] (--) NVIDIA(GPU-0): CRT-0: disconnected
[   823.903] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   823.903] (--) NVIDIA(GPU-0): 
[   823.903] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   823.903] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   823.903] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   823.903] (--) NVIDIA(GPU-0): 
[   823.920] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[   823.920] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[   823.920] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[   823.920] (--) NVIDIA(GPU-0): 
[  1443.402] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  1443.402] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[  1443.402] (--) NVIDIA(GPU-0): DFP-1: 340.0 MHz maximum pixel clock
[  1443.402] (--) NVIDIA(GPU-0): 
[  1443.403] (--) NVIDIA(GPU-0): CRT-0: disconnected
[  1443.403] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[  1443.403] (--) NVIDIA(GPU-0): 
[  1443.403] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  1443.403] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  1443.403] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[  1443.403] (--) NVIDIA(GPU-0): 
[  1443.403] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  1443.403] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[  1443.403] (--) NVIDIA(GPU-0): DFP-1: 340.0 MHz maximum pixel clock
[  1443.403] (--) NVIDIA(GPU-0): 
[  1444.851] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[  1444.851] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[  1444.851] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[  1444.851] (--) NVIDIA(GPU-0): 
[  1444.852] (--) NVIDIA(GPU-0): CRT-0: disconnected
[  1444.852] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[  1444.852] (--) NVIDIA(GPU-0): 
[  1444.853] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  1444.853] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  1444.853] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[  1444.853] (--) NVIDIA(GPU-0): 
[  1444.864] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[  1444.864] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[  1444.864] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[  1444.864] (--) NVIDIA(GPU-0): 
[  1444.875] (II) NVIDIA(0): Setting mode "HDMI-0: nvidia-auto-select @2560x1440 +0+0 {ViewPortIn=2560x1440, ViewPortOut=2560x1440+0+0}"
[  1444.943] (--) NVIDIA(GPU-0): CRT-0: disconnected
[  1444.943] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[  1444.943] (--) NVIDIA(GPU-0): 
[  1444.943] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  1444.943] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  1444.943] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[  1444.943] (--) NVIDIA(GPU-0): 
[  1444.956] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[  1444.956] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[  1444.956] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[  1444.956] (--) NVIDIA(GPU-0): 
[ 17617.468] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 17617.468] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 17617.468] (--) NVIDIA(GPU-0): DFP-1: 340.0 MHz maximum pixel clock
[ 17617.468] (--) NVIDIA(GPU-0): 
[ 17617.469] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 17617.469] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 17617.469] (--) NVIDIA(GPU-0): 
[ 17617.470] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 17617.470] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 17617.470] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 17617.470] (--) NVIDIA(GPU-0): 
[ 17617.470] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 17617.470] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 17617.470] (--) NVIDIA(GPU-0): DFP-1: 340.0 MHz maximum pixel clock
[ 17617.470] (--) NVIDIA(GPU-0): 
[ 17618.917] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[ 17618.917] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[ 17618.917] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[ 17618.917] (--) NVIDIA(GPU-0): 
[ 17618.918] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 17618.918] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 17618.918] (--) NVIDIA(GPU-0): 
[ 17618.918] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 17618.918] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 17618.918] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 17618.918] (--) NVIDIA(GPU-0): 
[ 17618.935] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[ 17618.935] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[ 17618.935] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[ 17618.935] (--) NVIDIA(GPU-0): 
[ 17618.949] (II) NVIDIA(0): Setting mode "HDMI-0: nvidia-auto-select @2560x1440 +0+0 {ViewPortIn=2560x1440, ViewPortOut=2560x1440+0+0}"
[ 17619.002] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 17619.002] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 17619.002] (--) NVIDIA(GPU-0): 
[ 17619.002] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 17619.002] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 17619.002] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 17619.002] (--) NVIDIA(GPU-0): 
[ 17619.014] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[ 17619.014] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[ 17619.014] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[ 17619.014] (--) NVIDIA(GPU-0): 
[ 18469.011] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 18469.011] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 18469.011] (--) NVIDIA(GPU-0): DFP-1: 340.0 MHz maximum pixel clock
[ 18469.011] (--) NVIDIA(GPU-0): 
[ 18469.012] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 18469.012] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 18469.012] (--) NVIDIA(GPU-0): 
[ 18469.012] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 18469.012] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 18469.012] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 18469.012] (--) NVIDIA(GPU-0): 
[ 18469.012] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 18469.012] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 18469.012] (--) NVIDIA(GPU-0): DFP-1: 340.0 MHz maximum pixel clock
[ 18469.012] (--) NVIDIA(GPU-0): 
[ 18470.462] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[ 18470.462] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[ 18470.462] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[ 18470.462] (--) NVIDIA(GPU-0): 
[ 18470.463] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 18470.463] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 18470.463] (--) NVIDIA(GPU-0): 
[ 18470.463] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 18470.463] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 18470.463] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 18470.463] (--) NVIDIA(GPU-0): 
[ 18470.475] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[ 18470.475] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[ 18470.475] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[ 18470.475] (--) NVIDIA(GPU-0): 
[ 18470.479] (II) NVIDIA(0): Setting mode "HDMI-0: nvidia-auto-select @2560x1440 +0+0 {ViewPortIn=2560x1440, ViewPortOut=2560x1440+0+0}"
[ 18470.546] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 18470.546] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 18470.546] (--) NVIDIA(GPU-0): 
[ 18470.546] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 18470.546] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 18470.546] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 18470.546] (--) NVIDIA(GPU-0): 
[ 18470.559] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[ 18470.559] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[ 18470.559] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[ 18470.559] (--) NVIDIA(GPU-0): 
[ 19659.973] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 19659.973] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 19659.973] (--) NVIDIA(GPU-0): DFP-1: 340.0 MHz maximum pixel clock
[ 19659.973] (--) NVIDIA(GPU-0): 
[ 19659.974] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 19659.974] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 19659.974] (--) NVIDIA(GPU-0): 
[ 19659.974] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 19659.974] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 19659.974] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 19659.974] (--) NVIDIA(GPU-0): 
[ 19659.974] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 19659.974] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 19659.974] (--) NVIDIA(GPU-0): DFP-1: 340.0 MHz maximum pixel clock
[ 19659.974] (--) NVIDIA(GPU-0): 
[ 19661.421] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[ 19661.421] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[ 19661.421] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[ 19661.421] (--) NVIDIA(GPU-0): 
[ 19661.421] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 19661.421] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 19661.421] (--) NVIDIA(GPU-0): 
[ 19661.421] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 19661.421] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 19661.421] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 19661.421] (--) NVIDIA(GPU-0): 
[ 19661.433] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[ 19661.433] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[ 19661.433] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[ 19661.433] (--) NVIDIA(GPU-0): 
[ 19661.446] (II) NVIDIA(0): Setting mode "HDMI-0: nvidia-auto-select @2560x1440 +0+0 {ViewPortIn=2560x1440, ViewPortOut=2560x1440+0+0}"
[ 19661.495] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 19661.495] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 19661.495] (--) NVIDIA(GPU-0): 
[ 19661.495] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 19661.495] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 19661.495] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 19661.495] (--) NVIDIA(GPU-0): 
[ 19661.511] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[ 19661.511] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[ 19661.511] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[ 19661.511] (--) NVIDIA(GPU-0): 
[ 21069.321] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 21069.321] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 21069.321] (--) NVIDIA(GPU-0): DFP-1: 340.0 MHz maximum pixel clock
[ 21069.321] (--) NVIDIA(GPU-0): 
[ 21069.322] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 21069.322] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 21069.322] (--) NVIDIA(GPU-0): 
[ 21069.322] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 21069.322] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 21069.322] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 21069.322] (--) NVIDIA(GPU-0): 
[ 21069.322] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 21069.322] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 21069.322] (--) NVIDIA(GPU-0): DFP-1: 340.0 MHz maximum pixel clock
[ 21069.322] (--) NVIDIA(GPU-0): 
[ 21070.773] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[ 21070.773] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[ 21070.773] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[ 21070.773] (--) NVIDIA(GPU-0): 
[ 21070.774] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 21070.774] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 21070.774] (--) NVIDIA(GPU-0): 
[ 21070.775] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 21070.775] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 21070.775] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 21070.775] (--) NVIDIA(GPU-0): 
[ 21070.786] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[ 21070.786] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[ 21070.786] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[ 21070.786] (--) NVIDIA(GPU-0): 
[ 21070.798] (II) NVIDIA(0): Setting mode "HDMI-0: nvidia-auto-select @2560x1440 +0+0 {ViewPortIn=2560x1440, ViewPortOut=2560x1440+0+0}"
[ 21070.861] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 21070.861] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 21070.861] (--) NVIDIA(GPU-0): 
[ 21070.861] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 21070.861] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 21070.861] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 21070.861] (--) NVIDIA(GPU-0): 
[ 21070.878] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[ 21070.878] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[ 21070.878] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[ 21070.878] (--) NVIDIA(GPU-0): 
[ 25022.619] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 25022.619] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 25022.619] (--) NVIDIA(GPU-0): DFP-1: 340.0 MHz maximum pixel clock
[ 25022.619] (--) NVIDIA(GPU-0): 
[ 25022.621] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 25022.621] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 25022.621] (--) NVIDIA(GPU-0): 
[ 25022.621] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 25022.621] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 25022.621] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 25022.621] (--) NVIDIA(GPU-0): 
[ 25022.621] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 25022.621] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 25022.621] (--) NVIDIA(GPU-0): DFP-1: 340.0 MHz maximum pixel clock
[ 25022.622] (--) NVIDIA(GPU-0): 
[ 25024.063] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[ 25024.063] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[ 25024.063] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[ 25024.063] (--) NVIDIA(GPU-0): 
[ 25024.064] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 25024.064] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 25024.064] (--) NVIDIA(GPU-0): 
[ 25024.064] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 25024.064] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 25024.064] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 25024.064] (--) NVIDIA(GPU-0): 
[ 25024.075] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[ 25024.075] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[ 25024.075] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[ 25024.075] (--) NVIDIA(GPU-0): 
[ 25024.098] (II) NVIDIA(0): Setting mode "HDMI-0: nvidia-auto-select @2560x1440 +0+0 {ViewPortIn=2560x1440, ViewPortOut=2560x1440+0+0}"
[ 25024.140] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 25024.140] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 25024.140] (--) NVIDIA(GPU-0): 
[ 25024.140] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 25024.140] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 25024.140] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 25024.140] (--) NVIDIA(GPU-0): 
[ 25024.151] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): connected
[ 25024.151] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): Internal TMDS
[ 25024.151] (--) NVIDIA(GPU-0): HP ENVY 32 (DFP-1): 340.0 MHz maximum pixel clock
[ 25024.151] (--) NVIDIA(GPU-0): 
C'est très long... et ça me donne l'impression de tourner en boucle.

Petite note en passant, le gestionnaire de mises à jour m'en propose deux en niveau 4 aujourd'hui, et en coche une par défaut:
- nvidia-graphics-driver-384 (cochée)
- systemd

Du coup je vais laisser tout ça en attente pour l'instant, en attendant vos retours...
Linux Mint 18.3, Cinnamon 3.6.7, Noyau 4.4.0.104-generic x86_64
CM ASUS Z170-P, CPU i5-6600K, 8GB DDR4
NVIDIA GK107 (GT 740), pilote nvidia, Ecran HP Envy 32'' QHD
DD SanDisk SSD 240G (système) + Seagate 320G

Avatar du membre
tyrry
Messages : 5606
Enregistré le : mar. 21 juil. 2015 07:42
Localisation : à l'ouest

Re: Écran noir après chaque mise à jour de noyau

Message par tyrry »

Slt ,
mets aussi un retour de :

Code : Tout sélectionner

dmesg
et fait aussi , peut-être cela "fixera" ton soucis video :

Code : Tout sélectionner

sudo dpkg-reconfigure xserver-xorg
@+

edit : oui oops , un tiret de trop ;)
Modifié en dernier par tyrry le mer. 25 oct. 2017 15:01, modifié 1 fois.
Desktop: LXDE Distro: Debian 12 Bookworm
Kernel: 6.1.0-18-amd64 Drive: Intel Nvme 240
CPU: Ryzen 3 PRO 2200GE RAM: 16 go Graphics Card: AMD ATI Radeon Vega Series

Proton88
Messages : 8
Enregistré le : sam. 21 oct. 2017 09:58
Localisation : Darnieulles (88150)
Contact :

Re: Écran noir après chaque mise à jour de noyau

Message par Proton88 »

Bonjour,

Voici mon dmesg

Code : Tout sélectionner

[    0.000000] microcode: CPU0 microcode updated early to revision 0xba, date = 2017-04-09
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-97-generic (buildd@lcy01-33) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #120-Ubuntu SMP Tue Sep 19 17:28:18 UTC 2017 (Ubuntu 4.4.0-97.120-generic 4.4.87)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-97-generic root=UUID=575d0ba1-118b-49b7-bf07-0ae2f5474e31 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  960, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000087d0ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000087d10000-0x0000000087d10fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000087d11000-0x0000000087d3afff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000087d3b000-0x0000000087d77fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000087d78000-0x0000000088296fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000088297000-0x000000008d343fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008d344000-0x000000008e824fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008e825000-0x000000008e85cfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008e85d000-0x000000008f1b8fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008f1b9000-0x000000008fbfefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008fbff000-0x000000008fbfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0 present.
[    0.000000] DMI: System manufacturer System Product Name/Z170-P, BIOS 0318 07/17/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x26f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x8fc00 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcce0-0x000fccef] mapped at [ffff8800000fcce0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[    0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[    0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[    0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
[    0.000000] BRK [0x02211000, 0x02211fff] PGTABLE
[    0.000000] BRK [0x02212000, 0x02212fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x333f0000-0x359effff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x000000008E830098 0000A4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000008E851C50 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000008E8301D0 021A7E (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x000000008F1B8F80 000040
[    0.000000] ACPI: APIC 0x000000008E851D60 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000008E851DE8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000008E851E30 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000008E851ED0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000008E851F10 000038 (v01 ALASKA A M I    01072009 AMI. 0005000B)
[    0.000000] ACPI: SSDT 0x000000008E851F48 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
[    0.000000] ACPI: LPIT 0x000000008E8522B8 000094 (v01 INTEL  SKL      00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000008E852350 000248 (v02 INTEL  sensrhub 00000000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000008E852598 002BAE (v02 INTEL  PtidDevc 00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000008E855148 000C45 (v02 INTEL  Ther_Rvp 00001000 INTL 20120913)
[    0.000000] ACPI: DBG2 0x000000008E855D90 000054 (v00 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000008E855DE8 000705 (v02 INTEL  xh_rvp08 00000000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000008E8564F0 005205 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x000000008E85B6F8 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: SSDT 0x000000008E85B740 000E58 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000026effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x26eff8000-0x26effcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000026effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009bfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000087d0ffff]
[    0.000000]   node   0: [mem 0x0000000087d3b000-0x0000000087d77fff]
[    0.000000]   node   0: [mem 0x0000000088297000-0x000000008d343fff]
[    0.000000]   node   0: [mem 0x000000008fbff000-0x000000008fbfffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000026effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff]
[    0.000000] On node 0 totalpages: 2080150
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8952 pages used for memmap
[    0.000000]   DMA32 zone: 572923 pages, LIFO batch:31
[    0.000000]   Normal zone: 23488 pages used for memmap
[    0.000000]   Normal zone: 1503232 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x87d10000-0x87d10fff]
[    0.000000] PM: Registered nosave memory: [mem 0x87d11000-0x87d3afff]
[    0.000000] PM: Registered nosave memory: [mem 0x87d78000-0x88296fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8d344000-0x8e824fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8e825000-0x8e85cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x8e85d000-0x8f1b8fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8f1b9000-0x8fbfefff]
[    0.000000] PM: Registered nosave memory: [mem 0x8fc00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x8fc00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 34 pages/cpu @ffff88026ec00000 s98328 r8192 d32744 u524288
[    0.000000] pcpu-alloc: s98328 r8192 d32744 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2047625
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-97-generic root=UUID=575d0ba1-118b-49b7-bf07-0ae2f5474e31 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8065144K/8320600K available (8480K kernel code, 1294K rwdata, 3984K rodata, 1492K init, 1316K bss, 255456K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:1024 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: using HPET reference calibration
[    0.000000] tsc: Detected 3504.088 MHz processor
[    0.000019] Calibrating delay loop (skipped), value calculated using timer frequency.. 7008.17 BogoMIPS (lpj=14016352)
[    0.000021] pid_max: default: 32768 minimum: 301
[    0.000024] ACPI: Core revision 20150930
[    0.018604] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20150930/dswload-210)
[    0.018608] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20150930/psobject-227)
[    0.018640] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20150930/tbxfload-193)
[    0.024587] ACPI Error: 1 table load failures, 7 successful (20150930/tbxfload-214)
[    0.024599] Security Framework initialized
[    0.024600] Yama: becoming mindful.
[    0.024609] AppArmor: AppArmor initialized
[    0.024915] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.025843] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.026241] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.026246] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.026367] Initializing cgroup subsys io
[    0.026368] Initializing cgroup subsys memory
[    0.026372] Initializing cgroup subsys devices
[    0.026373] Initializing cgroup subsys freezer
[    0.026374] Initializing cgroup subsys net_cls
[    0.026375] Initializing cgroup subsys perf_event
[    0.026376] Initializing cgroup subsys net_prio
[    0.026378] Initializing cgroup subsys hugetlb
[    0.026379] Initializing cgroup subsys pids
[    0.026398] CPU: Physical Processor ID: 0
[    0.026398] CPU: Processor Core ID: 0
[    0.026401] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.026402] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.027386] mce: CPU supports 10 MCE banks
[    0.027399] CPU0: Thermal monitoring enabled (TM1)
[    0.027406] process: using mwait in idle threads
[    0.027408] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.027409] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.027648] Freeing SMP alternatives memory: 32K
[    0.029065] ftrace: allocating 32148 entries in 126 pages
[    0.037837] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.037838] smpboot: Max logical packages: 1
[    0.039036] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.042048] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.081737] TSC deadline timer enabled
[    0.081742] smpboot: CPU0: Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.081751] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
[    0.081770] ... version:                4
[    0.081770] ... bit width:              48
[    0.081771] ... generic registers:      8
[    0.081771] ... value mask:             0000ffffffffffff
[    0.081772] ... max period:             00007fffffffffff
[    0.081772] ... fixed-purpose events:   3
[    0.081773] ... event mask:             00000007000000ff
[    0.082296] x86: Booting SMP configuration:
[    0.082297] .... node  #0, CPUs:      #1
[    0.083438] microcode: CPU1 microcode updated early to revision 0xba, date = 2017-04-09
[    0.086543] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.086583]  #2
[    0.087723] microcode: CPU2 microcode updated early to revision 0xba, date = 2017-04-09
[    0.090855]  #3
[    0.091899] microcode: CPU3 microcode updated early to revision 0xba, date = 2017-04-09
[    0.094999] x86: Booted up 1 node, 4 CPUs
[    0.095000] smpboot: Total of 4 processors activated (28032.70 BogoMIPS)
[    0.097370] devtmpfs: initialized
[    0.099093] evm: security.selinux
[    0.099094] evm: security.SMACK64
[    0.099095] evm: security.SMACK64EXEC
[    0.099095] evm: security.SMACK64TRANSMUTE
[    0.099096] evm: security.SMACK64MMAP
[    0.099096] evm: security.ima
[    0.099097] evm: security.capability
[    0.099130] PM: Registering ACPI NVS region [mem 0x87d10000-0x87d10fff] (4096 bytes)
[    0.099131] PM: Registering ACPI NVS region [mem 0x8e85d000-0x8f1b8fff] (9814016 bytes)
[    0.099243] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.099249] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.099305] pinctrl core: initialized pinctrl subsystem
[    0.099447] RTC time:  4:19:34, date: 10/25/17
[    0.099522] NET: Registered protocol family 16
[    0.110991] cpuidle: using governor ladder
[    0.122991] cpuidle: using governor menu
[    0.122993] PCCT header not found.
[    0.123035] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.123036] ACPI: bus type PCI registered
[    0.123037] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.123084] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.123086] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.123093] PCI: Using configuration type 1 for base access
[    0.135193] ACPI: Added _OSI(Module Device)
[    0.135194] ACPI: Added _OSI(Processor Device)
[    0.135195] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.135196] ACPI: Added _OSI(Processor Aggregator Device)
[    0.140116] ACPI: Executed 21 blocks of module-level executable AML code
[    0.144063] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.146181] ACPI: Dynamic OEM Table Load:
[    0.146185] ACPI: SSDT 0xFFFF880265302000 000705 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.146769] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.148188] ACPI: Dynamic OEM Table Load:
[    0.148191] ACPI: SSDT 0xFFFF880265302800 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.150268] ACPI: Interpreter enabled
[    0.150291] ACPI: (supports S0 S3 S4 S5)
[    0.150292] ACPI: Using IOAPIC for interrupt routing
[    0.150315] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.151655] ACPI: Power Resource [PG00] (on)
[    0.174723] ACPI: Power Resource [PG01] (on)
[    0.194715] ACPI: Power Resource [PG02] (on)
[    0.215960] ACPI: Power Resource [WRST] (off)
[    0.216199] ACPI: Power Resource [WRST] (off)
[    0.216436] ACPI: Power Resource [WRST] (off)
[    0.216674] ACPI: Power Resource [WRST] (off)
[    0.216911] ACPI: Power Resource [WRST] (off)
[    0.217146] ACPI: Power Resource [WRST] (off)
[    0.217385] ACPI: Power Resource [WRST] (off)
[    0.217635] ACPI: Power Resource [WRST] (off)
[    0.217893] ACPI: Power Resource [WRST] (off)
[    0.218132] ACPI: Power Resource [WRST] (off)
[    0.218368] ACPI: Power Resource [WRST] (off)
[    0.218607] ACPI: Power Resource [WRST] (off)
[    0.218843] ACPI: Power Resource [WRST] (off)
[    0.219073] ACPI: Power Resource [WRST] (off)
[    0.219309] ACPI: Power Resource [WRST] (off)
[    0.219546] ACPI: Power Resource [WRST] (off)
[    0.219784] ACPI: Power Resource [WRST] (off)
[    0.220021] ACPI: Power Resource [WRST] (off)
[    0.220256] ACPI: Power Resource [WRST] (off)
[    0.220497] ACPI: Power Resource [WRST] (off)
[    0.224942] ACPI: Power Resource [FN00] (off)
[    0.224986] ACPI: Power Resource [FN01] (off)
[    0.225028] ACPI: Power Resource [FN02] (off)
[    0.225070] ACPI: Power Resource [FN03] (off)
[    0.225112] ACPI: Power Resource [FN04] (off)
[    0.225877] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.225880] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.236134] \_SB_.PCI0:_OSC invalid UUID
[    0.236135] _OSC request data:1 1f 0 
[    0.236137] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.236552] PCI host bridge to bus 0000:00
[    0.236554] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.236555] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.236556] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.236557] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.236558] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.236559] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.236564] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[    0.236763] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.236790] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.236865] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.236968] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.236991] pci 0000:00:14.0: reg 0x10: [mem 0xd3810000-0xd381ffff 64bit]
[    0.237038] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.237103] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.237148] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.237176] pci 0000:00:16.0: reg 0x10: [mem 0xd382d000-0xd382dfff 64bit]
[    0.237225] pci 0000:00:16.0: PME# supported from D3hot
[    0.237323] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[    0.237341] pci 0000:00:17.0: reg 0x10: [mem 0xd3828000-0xd3829fff]
[    0.237347] pci 0000:00:17.0: reg 0x14: [mem 0xd382c000-0xd382c0ff]
[    0.237352] pci 0000:00:17.0: reg 0x18: [io  0xf050-0xf057]
[    0.237358] pci 0000:00:17.0: reg 0x1c: [io  0xf040-0xf043]
[    0.237364] pci 0000:00:17.0: reg 0x20: [io  0xf020-0xf03f]
[    0.237370] pci 0000:00:17.0: reg 0x24: [mem 0xd382b000-0xd382b7ff]
[    0.237394] pci 0000:00:17.0: PME# supported from D3hot
[    0.237479] pci 0000:00:1b.0: [8086:a167] type 01 class 0x060400
[    0.237522] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.237592] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.237619] pci 0000:00:1b.3: [8086:a16a] type 01 class 0x060400
[    0.237665] pci 0000:00:1b.3: PME# supported from D0 D3hot D3cold
[    0.237740] pci 0000:00:1b.3: System wakeup disabled by ACPI
[    0.237773] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[    0.237815] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.237884] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.237907] pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
[    0.237952] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.238024] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.238045] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
[    0.238090] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.238162] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.238198] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[    0.238247] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.238317] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.238363] pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
[    0.238527] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.238538] pci 0000:00:1f.2: reg 0x10: [mem 0xd3824000-0xd3827fff]
[    0.238660] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.238690] pci 0000:00:1f.3: reg 0x10: [mem 0xd3820000-0xd3823fff 64bit]
[    0.238718] pci 0000:00:1f.3: reg 0x20: [mem 0xd3800000-0xd380ffff 64bit]
[    0.238749] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.238847] pci 0000:00:1f.3: System wakeup disabled by ACPI
[    0.238876] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.238929] pci 0000:00:1f.4: reg 0x10: [mem 0xd382a000-0xd382a0ff 64bit]
[    0.238997] pci 0000:00:1f.4: reg 0x20: [io  0xf000-0xf01f]
[    0.239165] pci 0000:01:00.0: [10de:0fc8] type 00 class 0x030000
[    0.239182] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[    0.239191] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.239199] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.239205] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.239211] pci 0000:01:00.0: reg 0x30: [mem 0xd3000000-0xd307ffff pref]
[    0.239254] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.239279] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
[    0.239295] pci 0000:01:00.1: reg 0x10: [mem 0xd3080000-0xd3083fff]
[    0.250553] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.250555] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.250556] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd30fffff]
[    0.250596] acpiphp: Slot [1] registered
[    0.250599] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    0.250646] pci 0000:03:00.0: [1415:c158] type 00 class 0x070002
[    0.250677] pci 0000:03:00.0: reg 0x10: [mem 0xd3600000-0xd3603fff]
[    0.250687] pci 0000:03:00.0: reg 0x14: [mem 0xd3400000-0xd35fffff]
[    0.250697] pci 0000:03:00.0: reg 0x18: [mem 0xd3200000-0xd33fffff]
[    0.250770] pci 0000:03:00.0: supports D1 D2
[    0.250771] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.250796] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.258555] pci 0000:00:1b.3: PCI bridge to [bus 03]
[    0.258558] pci 0000:00:1b.3:   bridge window [mem 0xd3200000-0xd36fffff]
[    0.258597] acpiphp: Slot [1-1] registered
[    0.258600] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.258655] pci 0000:05:00.0: [1b21:1080] type 01 class 0x060400
[    0.258766] pci 0000:05:00.0: supports D1 D2
[    0.258766] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.258791] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.266555] pci 0000:00:1c.2: PCI bridge to [bus 05-06]
[    0.266657] pci 0000:05:00.0: PCI bridge to [bus 06]
[    0.266723] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
[    0.266756] pci 0000:07:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.266779] pci 0000:07:00.0: reg 0x18: [mem 0xd3704000-0xd3704fff 64bit]
[    0.266793] pci 0000:07:00.0: reg 0x20: [mem 0xd3700000-0xd3703fff 64bit]
[    0.266853] pci 0000:07:00.0: supports D1 D2
[    0.266854] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.266892] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.274558] pci 0000:00:1c.3: PCI bridge to [bus 07]
[    0.274560] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.274562] pci 0000:00:1c.3:   bridge window [mem 0xd3700000-0xd37fffff]
[    0.274606] acpiphp: Slot [1-2] registered
[    0.274609] pci 0000:00:1d.0: PCI bridge to [bus 08]
[    0.275834] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.275867] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.275900] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.275932] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15)
[    0.275965] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.275998] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.276032] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.276064] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.276311] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.276380] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.276381] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.276382] vgaarb: loaded
[    0.276382] vgaarb: bridge control possible 0000:01:00.0
[    0.276513] SCSI subsystem initialized
[    0.276534] libata version 3.00 loaded.
[    0.276553] ACPI: bus type USB registered
[    0.276562] usbcore: registered new interface driver usbfs
[    0.276568] usbcore: registered new interface driver hub
[    0.276577] usbcore: registered new device driver usb
[    0.276668] PCI: Using ACPI for IRQ routing
[    0.304132] PCI: pci_cache_line_size set to 64 bytes
[    0.304177] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[    0.304178] e820: reserve RAM buffer [mem 0x87d10000-0x87ffffff]
[    0.304179] e820: reserve RAM buffer [mem 0x87d78000-0x87ffffff]
[    0.304179] e820: reserve RAM buffer [mem 0x8d344000-0x8fffffff]
[    0.304180] e820: reserve RAM buffer [mem 0x8fc00000-0x8fffffff]
[    0.304181] e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff]
[    0.304248] NetLabel: Initializing
[    0.304249] NetLabel:  domain hash size = 128
[    0.304250] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.304256] NetLabel:  unlabeled traffic allowed by default
[    0.304329] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.304332] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.306366] amd_nb: Cannot enumerate AMD northbridges
[    0.306376] clocksource: Switched to clocksource hpet
[    0.309799] AppArmor: AppArmor Filesystem Enabled
[    0.309829] pnp: PnP ACPI init
[    0.309956] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.309959] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.310191] pnp 00:01: [dma 0 disabled]
[    0.310217] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.310319] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.310320] system 00:02: [io  0xffff] has been reserved
[    0.310321] system 00:02: [io  0xffff] has been reserved
[    0.310322] system 00:02: [io  0xffff] has been reserved
[    0.310323] system 00:02: [io  0x1800-0x18fe] could not be reserved
[    0.310324] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.310326] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.310405] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.310407] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.310419] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.310442] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.310443] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.310572] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.310574] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.310575] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.310575] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.310576] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.310577] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.310578] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.310579] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.310580] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.310581] system 00:06: [mem 0xdffc0000-0xdffdffff] has been reserved
[    0.310583] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.310607] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.310608] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.310609] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.310610] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.310611] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.310612] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.310613] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.310614] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.311253] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.311254] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.311255] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.311257] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.311747] pnp: PnP ACPI: found 9 devices
[    0.319638] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.319679] pci 0000:00:1d.0: bridge window [io  0x1000-0x0fff] to [bus 08] add_size 1000
[    0.319681] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000
[    0.319682] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000 add_align 100000
[    0.319685] pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.319686] pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.319687] pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.319688] pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.319689] pci 0000:00:1d.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.319690] pci 0000:00:1d.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.319692] pci 0000:00:1d.0: BAR 14: assigned [mem 0x90000000-0x901fffff]
[    0.319695] pci 0000:00:1d.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref]
[    0.319696] pci 0000:00:1d.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.319698] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.319699] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.319701] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd30fffff]
[    0.319704] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    0.319710] pci 0000:00:1b.3: PCI bridge to [bus 03]
[    0.319713] pci 0000:00:1b.3:   bridge window [mem 0xd3200000-0xd36fffff]
[    0.319717] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.319723] pci 0000:05:00.0: PCI bridge to [bus 06]
[    0.319736] pci 0000:00:1c.2: PCI bridge to [bus 05-06]
[    0.319743] pci 0000:00:1c.3: PCI bridge to [bus 07]
[    0.319744] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.319746] pci 0000:00:1c.3:   bridge window [mem 0xd3700000-0xd37fffff]
[    0.319751] pci 0000:00:1d.0: PCI bridge to [bus 08]
[    0.319753] pci 0000:00:1d.0:   bridge window [io  0x2000-0x2fff]
[    0.319756] pci 0000:00:1d.0:   bridge window [mem 0x90000000-0x901fffff]
[    0.319758] pci 0000:00:1d.0:   bridge window [mem 0x90200000-0x903fffff 64bit pref]
[    0.319763] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.319764] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.319765] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.319766] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[    0.319766] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.319767] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.319768] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd30fffff]
[    0.319769] pci_bus 0000:03: resource 1 [mem 0xd3200000-0xd36fffff]
[    0.319770] pci_bus 0000:07: resource 0 [io  0xd000-0xdfff]
[    0.319771] pci_bus 0000:07: resource 1 [mem 0xd3700000-0xd37fffff]
[    0.319772] pci_bus 0000:08: resource 0 [io  0x2000-0x2fff]
[    0.319772] pci_bus 0000:08: resource 1 [mem 0x90000000-0x901fffff]
[    0.319773] pci_bus 0000:08: resource 2 [mem 0x90200000-0x903fffff 64bit pref]
[    0.319790] NET: Registered protocol family 2
[    0.319873] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.319943] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.320021] TCP: Hash tables configured (established 65536 bind 65536)
[    0.320035] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.320049] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.320078] NET: Registered protocol family 1
[    0.320681] pci 0000:01:00.0: Video device with shadowed ROM
[    0.320693] PCI: CLS 0 bytes, default 64
[    0.320719] Unpacking initramfs...
[    0.712553] Freeing initrd memory: 38912K
[    0.712569] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.712571] software IO TLB [mem 0x89344000-0x8d344000] (64MB) mapped at [ffff880089344000-ffff88008d343fff]
[    0.712684] Scanning for low memory corruption every 60 seconds
[    0.712942] audit: initializing netlink subsys (disabled)
[    0.712951] audit: type=2000 audit(1508905174.720:1): initialized
[    0.713184] Initialise system trusted keyring
[    0.713306] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.713306] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.714120] zbud: loaded
[    0.714257] VFS: Disk quotas dquot_6.6.0
[    0.714275] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.714452] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.714618] fuse init (API version 7.23)
[    0.714701] Key type big_key registered
[    0.714713] Allocating IMA MOK and blacklist keyrings.
[    0.715460] Key type asymmetric registered
[    0.715463] Asymmetric key parser 'x509' registered
[    0.715489] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.715551] io scheduler noop registered
[    0.715553] io scheduler deadline registered (default)
[    0.715571] io scheduler cfq registered
[    0.716156] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.716159] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.716175] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    0.716176] vesafb: scrolling: redraw
[    0.716177] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.716184] vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90001000000, using 1216k, total 1216k
[    0.716236] Console: switching to colour frame buffer device 80x30
[    0.716241] fb0: VESA VGA frame buffer device
[    0.716249] intel_idle: MWAIT substates: 0x142120
[    0.716250] intel_idle: v0.4.1 model 0x5E
[    0.716251] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.716424] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.716426] ACPI: Sleep Button [SLPB]
[    0.716445] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.716447] ACPI: Power Button [PWRB]
[    0.716465] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.716466] ACPI: Power Button [PWRF]
[    0.716976] thermal LNXTHERM:00: registered as thermal_zone0
[    0.716977] ACPI: Thermal Zone [TZ00] (28 C)
[    0.717050] thermal LNXTHERM:01: registered as thermal_zone1
[    0.717051] ACPI: Thermal Zone [TZ01] (30 C)
[    0.717074] GHES: HEST is not enabled!
[    0.717164] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.737697] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.739889] ttyS4: detected caps 00000700 should be 00000500
[    0.739890] 0000:03:00.0: ttyS4 at MMIO 0xd3601000 (irq = 19, base_baud = 4000000) is a 16C950/954
[    0.740021] ttyS5: detected caps 00000700 should be 00000500
[    0.740022] 0000:03:00.0: ttyS5 at MMIO 0xd3601200 (irq = 19, base_baud = 4000000) is a 16C950/954
[    0.740289] Linux agpgart interface v0.103
[    0.742136] loop: module loaded
[    0.742255] libphy: Fixed MDIO Bus: probed
[    0.742257] tun: Universal TUN/TAP device driver, 1.6
[    0.742258] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.742303] PPP generic driver version 2.4.2
[    0.742403] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.742406] ehci-pci: EHCI PCI platform driver
[    0.742412] ehci-platform: EHCI generic platform driver
[    0.742419] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.742421] ohci-pci: OHCI PCI platform driver
[    0.742427] ohci-platform: OHCI generic platform driver
[    0.742432] uhci_hcd: USB Universal Host Controller Interface driver
[    0.742525] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.742529] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.743600] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x100 quirks 0x00109810
[    0.743604] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.743659] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.743660] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.743661] usb usb1: Product: xHCI Host Controller
[    0.743662] usb usb1: Manufacturer: Linux 4.4.0-97-generic xhci-hcd
[    0.743663] usb usb1: SerialNumber: 0000:00:14.0
[    0.743745] hub 1-0:1.0: USB hub found
[    0.743759] hub 1-0:1.0: 16 ports detected
[    0.743937] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.743938] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.743955] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.743955] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.743956] usb usb2: Product: xHCI Host Controller
[    0.743957] usb usb2: Manufacturer: Linux 4.4.0-97-generic xhci-hcd
[    0.743958] usb usb2: SerialNumber: 0000:00:14.0
[    0.744057] hub 2-0:1.0: USB hub found
[    0.744067] hub 2-0:1.0: 10 ports detected
[    0.744243] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.747459] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.747461] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.747627] mousedev: PS/2 mouse device common for all mice
[    0.747920] rtc_cmos 00:04: RTC can wake from S4
[    0.748322] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.748404] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.748407] i2c /dev entries driver
[    0.748435] device-mapper: uevent: version 1.0.3
[    0.748526] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    0.748533] Intel P-state driver initializing.
[    0.749307] intel_pstate: HWP enabled
[    0.749310] ledtrig-cpu: registered to indicate activity on CPUs
[    0.749796] NET: Registered protocol family 10
[    0.749964] NET: Registered protocol family 17
[    0.749971] Key type dns_resolver registered
[    0.750100] microcode: CPU0 sig=0x506e3, pf=0x2, revision=0xba
[    0.750119] microcode: CPU1 sig=0x506e3, pf=0x2, revision=0xba
[    0.750121] microcode: CPU2 sig=0x506e3, pf=0x2, revision=0xba
[    0.750155] microcode: CPU3 sig=0x506e3, pf=0x2, revision=0xba
[    0.750202] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.750493] registered taskstats version 1
[    0.750503] Loading compiled-in X.509 certificates
[    0.750892] Loaded X.509 cert 'Build time autogenerated kernel key: d1010f9627fd9242df4b03365d2931dfd1ad3d42'
[    0.750901] zswap: loaded using pool lzo/zbud
[    0.752482] Key type trusted registered
[    0.755681] Key type encrypted registered
[    0.755685] AppArmor: AppArmor sha1 policy hashing enabled
[    0.755687] ima: No TPM chip found, activating TPM-bypass!
[    0.755698] evm: HMAC attrs: 0x1
[    0.756466]   Magic number: 5:596:313
[    0.756725] rtc_cmos 00:04: setting system clock to 2017-10-25 04:19:34 UTC (1508905174)
[    0.756788] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.756789] EDD information not available.
[    0.756827] PM: Hibernation image not present or could not be loaded.
[    0.757531] Freeing unused kernel memory: 1492K
[    0.757532] Write protecting the kernel read-only data: 14336k
[    0.757994] Freeing unused kernel memory: 1748K
[    0.758186] Freeing unused kernel memory: 112K
[    0.765498] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.765539] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.765545] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.765553] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.765722] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.765746] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.765865] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.765889] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.765911] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.765934] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.778444] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    0.781089] hidraw: raw HID events driver (C) Jiri Kosina
[    0.800871] ahci 0000:00:17.0: version 3.0
[    0.803971] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.803975] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.811486] r8169 0000:07:00.0 eth0: RTL8168h/8111h at 0xffffc90000cb2000, 1c:87:2c:61:3e:7b, XID 14100800 IRQ 123
[    0.811488] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.814560] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0x3c impl SATA mode
[    0.814563] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst 
[    0.839020] scsi host0: ahci
[    0.839230] scsi host1: ahci
[    0.839533] scsi host2: ahci
[    0.839705] scsi host3: ahci
[    0.839946] scsi host4: ahci
[    0.840124] scsi host5: ahci
[    0.840152] ata1: DUMMY
[    0.840153] ata2: DUMMY
[    0.840157] ata3: SATA max UDMA/133 abar m2048@0xd382b000 port 0xd382b200 irq 122
[    0.840162] ata4: SATA max UDMA/133 abar m2048@0xd382b000 port 0xd382b280 irq 122
[    0.840166] ata5: SATA max UDMA/133 abar m2048@0xd382b000 port 0xd382b300 irq 122
[    0.840171] ata6: SATA max UDMA/133 abar m2048@0xd382b000 port 0xd382b380 irq 122
[    1.054489] usb 1-8: new full-speed USB device number 2 using xhci_hcd
[    1.158571] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.158595] ata6: SATA link down (SStatus 4 SControl 300)
[    1.158623] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.158674] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.160536] ata3.00: ATA-9: SanDisk SDSSDA240G, Z22000RL, max UDMA/133
[    1.160537] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.161650] ata5.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL00, max UDMA/100
[    1.165458] ata5.00: configured for UDMA/100
[    1.171606] ata3.00: configured for UDMA/133
[    1.171782] scsi 2:0:0:0: Direct-Access     ATA      SanDisk SDSSDA24 00RL PQ: 0 ANSI: 5
[    1.172165] sd 2:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    1.172174] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.172177] sd 2:0:0:0: [sda] Write Protect is off
[    1.172179] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.172183] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.173733]  sda: sda1 sda2 sda3 sda4 sda5
[    1.174189] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.189755] usb 1-8: New USB device found, idVendor=03f0, idProduct=1405
[    1.189757] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=12
[    1.189758] usb 1-8: Product: HP Scanjet Scanner
[    1.189771] usb 1-8: Manufacturer: Hewlett-Packard
[    1.189772] usb 1-8: SerialNumber: CN37DS20GM
[    1.193786] ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
[    1.193787] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.252104] ata4.00: configured for UDMA/133
[    1.252599] scsi 3:0:0:0: Direct-Access     ATA      ST3320620AS      K    PQ: 0 ANSI: 5
[    1.253030] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.253061] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.253465] sd 3:0:0:0: [sdb] Write Protect is off
[    1.253467] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.253645] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.256752] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS40  NL00 PQ: 0 ANSI: 5
[    1.279081] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.279082] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.279234] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.279351] sr 4:0:0:0: Attached scsi generic sg2 type 5
[    1.291787]  sdb: sdb1
[    1.292658] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.302428] usb 1-9: new low-speed USB device number 3 using xhci_hcd
[    1.436121] usb 1-9: New USB device found, idVendor=046d, idProduct=c517
[    1.436123] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.436124] usb 1-9: Product: USB Receiver
[    1.436124] usb 1-9: Manufacturer: Logitech
[    1.436253] usb 1-9: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.436255] usb 1-9: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.444978] usbcore: registered new interface driver usbhid
[    1.444979] usbhid: USB HID core driver
[    1.447089] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:046D:C517.0001/input/input6
[    1.502773] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-9/input0
[    1.502779] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[    1.503034] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:046D:C517.0002/input/input7
[    1.559022] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-9/input1
[    1.602553] usb 1-10: new high-speed USB device number 4 using xhci_hcd
[    1.710488] tsc: Refined TSC clocksource calibration: 3504.017 MHz
[    1.710490] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x328223bcabe, max_idle_ns: 440795285997 ns
[    1.730824] usb 1-10: New USB device found, idVendor=0424, idProduct=2532
[    1.730825] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.731279] hub 1-10:1.0: USB hub found
[    1.731308] hub 1-10:1.0: 2 ports detected
[    1.898475] usb 1-11: new high-speed USB device number 5 using xhci_hcd
[    2.027419] usb 1-11: New USB device found, idVendor=05ca, idProduct=0453
[    2.027420] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.027421] usb 1-11: Product: SP 150
[    2.027422] usb 1-11: Manufacturer: RICOH
[    2.027423] usb 1-11: SerialNumber: Y066M600982
[    2.098462] usb 1-10.1: new high-speed USB device number 6 using xhci_hcd
[    2.188818] usb 1-10.1: New USB device found, idVendor=05e3, idProduct=0605
[    2.188820] usb 1-10.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.188820] usb 1-10.1: Product: USB2.0 Hub
[    2.189613] hub 1-10.1:1.0: USB hub found
[    2.190017] hub 1-10.1:1.0: 4 ports detected
[    2.298419] usb 1-14: new high-speed USB device number 7 using xhci_hcd
[    2.429270] usb 1-14: New USB device found, idVendor=058f, idProduct=6362
[    2.429271] usb 1-14: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.429272] usb 1-14: Product: Mass Storage Device
[    2.429273] usb 1-14: Manufacturer: Generic
[    2.429273] usb 1-14: SerialNumber: 058F312D81B
[    2.432277] usb-storage 1-14:1.0: USB Mass Storage device detected
[    2.432616] scsi host6: usb-storage 1-14:1.0
[    2.432650] usbcore: registered new interface driver usb-storage
[    2.433693] usbcore: registered new interface driver uas
[    2.498452] usb 1-10.2: new high-speed USB device number 8 using xhci_hcd
[    2.674411] usb 1-10.1.1: new high-speed USB device number 9 using xhci_hcd
[    2.710767] clocksource: Switched to clocksource tsc
[    2.745948] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.783567] usb 1-10.1.1: New USB device found, idVendor=1871, idProduct=7670
[    2.783568] usb 1-10.1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.783569] usb 1-10.1.1: Product: USB2.0 UVC PC Camera
[    2.870221] usb 1-10.2: New USB device found, idVendor=046d, idProduct=0826
[    2.870222] usb 1-10.2: New USB device strings: Mfr=0, Product=2, SerialNumber=1
[    2.870223] usb 1-10.2: Product: HD Webcam C525
[    2.870224] usb 1-10.2: SerialNumber: 1BB494D0
[    2.882691] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    2.882756] systemd[1]: Detected architecture x86-64.
[    2.882917] systemd[1]: Set hostname to <ppn>.
[    2.898354] usb 1-10.1.3: new high-speed USB device number 10 using xhci_hcd
[    2.924397] random: nonblocking pool is initialized
[    2.986416] usb 1-10.1.3: New USB device found, idVendor=0ce9, idProduct=1001
[    2.986417] usb 1-10.1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.021644] systemd[1]: Reached target Remote File Systems (Pre).
[    3.021673] systemd[1]: Reached target Remote File Systems.
[    3.021689] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.021705] systemd[1]: Listening on udev Control Socket.
[    3.021733] systemd[1]: Listening on Journal Audit Socket.
[    3.021748] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    3.021759] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.021774] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.021784] systemd[1]: Listening on Syslog Socket.
[    3.021823] systemd[1]: Created slice User and Session Slice.
[    3.021828] systemd[1]: Reached target Encrypted Volumes.
[    3.021839] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.021854] systemd[1]: Listening on Journal Socket.
[    3.021872] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.021882] systemd[1]: Listening on LVM2 poll daemon socket.
[    3.021890] systemd[1]: Listening on LVM2 metadata daemon socket.
[    3.021975] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.021981] systemd[1]: Reached target User and Group Name Lookups.
[    3.021990] systemd[1]: Listening on udev Kernel Socket.
[    3.022020] systemd[1]: Created slice System Slice.
[    3.038461] systemd[1]: Mounting POSIX Message Queue File System...
[    3.038476] systemd[1]: Reached target Slices.
[    3.042427] systemd[1]: Starting Load Kernel Modules...
[    3.042609] systemd[1]: Starting Journal Service...
[    3.042786] systemd[1]: Mounting Huge Pages File System...
[    3.042967] systemd[1]: Starting Set console keymap...
[    3.043145] systemd[1]: Mounting Debug File System...
[    3.043188] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    3.043375] systemd[1]: Starting Uncomplicated firewall...
[    3.043543] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    3.047766] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.056170] systemd[1]: Started Uncomplicated firewall.
[    3.058315] usb 1-10.1.4: new full-speed USB device number 11 using xhci_hcd
[    3.059391] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    3.059645] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.060606] systemd[1]: Mounted Debug File System.
[    3.060645] systemd[1]: Mounted Huge Pages File System.
[    3.060937] systemd[1]: Mounted POSIX Message Queue File System.
[    3.072755] lp: driver loaded but no devices found
[    3.078089] ppdev: user-space parallel port driver
[    3.083965] systemd[1]: Started Load Kernel Modules.
[    3.094413] systemd[1]: Starting Apply Kernel Variables...
[    3.094629] systemd[1]: Mounting FUSE Control File System...
[    3.095586] systemd[1]: Mounted FUSE Control File System.
[    3.098226] systemd[1]: Started LVM2 metadata daemon.
[    3.098535] systemd[1]: Started Journal Service.
[    3.148600] usb 1-10.1.4: New USB device found, idVendor=2341, idProduct=0001
[    3.148602] usb 1-10.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[    3.148603] usb 1-10.1.4: Product: Arduino Uno
[    3.148604] usb 1-10.1.4: Manufacturer: Arduino (www.arduino.cc)
[    3.148605] usb 1-10.1.4: SerialNumber: 75633313233351F030F0
[    3.148719] usb 1-10.1.4: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[    3.186004] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    3.209966] cdc_acm 1-10.1.4:1.0: ttyACM0: USB ACM device
[    3.210139] usbcore: registered new interface driver cdc_acm
[    3.210141] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    3.236276] wmi: Mapper loaded
[    3.243517] Bluetooth: Core ver 2.21
[    3.243524] NET: Registered protocol family 31
[    3.243524] Bluetooth: HCI device and connection manager initialized
[    3.243526] Bluetooth: HCI socket layer initialized
[    3.243527] Bluetooth: L2CAP socket layer initialized
[    3.243529] Bluetooth: SCO socket layer initialized
[    3.248519] Bluetooth: HCI UART driver ver 2.3
[    3.248520] Bluetooth: HCI UART protocol H4 registered
[    3.248521] Bluetooth: HCI UART protocol BCSP registered
[    3.248522] Bluetooth: HCI UART protocol LL registered
[    3.248522] Bluetooth: HCI UART protocol ATH3K registered
[    3.248523] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    3.248539] Bluetooth: HCI UART protocol Intel registered
[    3.248545] Bluetooth: HCI UART protocol BCM registered
[    3.248545] Bluetooth: HCI UART protocol QCA registered
[    3.253408] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.254917] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.285297] usblp 1-11:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x05CA pid 0x0453
[    3.285310] usbcore: registered new interface driver usblp
[    3.289859] [drm] Initialized drm 1.1.0 20060810
[    3.304706] media: Linux media interface: v0.10
[    3.311206] Linux video capture interface: v2.00
[    3.327230] snd_hda_intel 0000:01:00.1: Disabling MSI
[    3.327233] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    3.329899] uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera (1871:7670)
[    3.353568] usb 1-10.2: set resolution quirk: cval->res = 384
[    3.353639] usbcore: registered new interface driver snd-usb-audio
[    3.369378] snd_hda_intel 0000:00:1f.3: failed to add i915_bpo component master (-19)
[    3.369634] AVX2 version of gcm_enc/dec engaged.
[    3.369635] AES CTR mode by8 optimization enabled
[    3.374767] input: USB2.0 UVC PC Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.1/1-10.1.1/1-10.1.1:1.0/input/input8
[    3.374807] uvcvideo: Found UVC 1.00 device HD Webcam C525 (046d:0826)
[    3.387077] input: HD Webcam C525 as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.2/1-10.2:1.2/input/input9
[    3.387108] usbcore: registered new interface driver uvcvideo
[    3.387109] USB Video Class driver (1.1.1)
[    3.387872] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    3.387873] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.387874] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    3.387875] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.387876] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    3.387876] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.387877] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    3.387878] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    3.387879] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    3.399115] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    3.399145] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    3.399174] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    3.399209] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    3.399258] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    3.430841] scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    3.431284] scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    3.431858] scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    3.432030] Adding 7811068k swap on /dev/sda1.  Priority:-1 extents:1 across:7811068k SSFS
[    3.432369] scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    3.432559] sd 6:0:0:0: Attached scsi generic sg3 type 0
[    3.432629] sd 6:0:0:1: Attached scsi generic sg4 type 0
[    3.432689] sd 6:0:0:2: Attached scsi generic sg5 type 0
[    3.432755] sd 6:0:0:3: Attached scsi generic sg6 type 0
[    3.433540] intel_rapl: Found RAPL domain package
[    3.433542] intel_rapl: Found RAPL domain core
[    3.433544] intel_rapl: Found RAPL domain dram
[    3.438945] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    3.439337] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[    3.439502] nvidia: module license 'NVIDIA' taints kernel.
[    3.439503] Disabling lock debugging due to kernel taint
[    3.439869] sd 6:0:0:2: [sde] Attached SCSI removable disk
[    3.441654] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[    3.441866] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    3.444917] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    3.444958] nvidia-nvlink: Nvlink Core is being initialized, major device number 243
[    3.444966] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  375.66  Mon May  1 15:29:16 PDT 2017 (using threaded interrupts)
[    3.448424] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  375.66  Mon May  1 14:33:30 PDT 2017
[    3.449684] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    3.454018] asus_wmi: ASUS WMI generic driver loaded
[    3.455432] asus_wmi: Initialization: 0x0
[    3.455443] asus_wmi: BIOS WMI version: 0.9
[    3.455460] asus_wmi: SFUN value: 0x0
[    3.455590] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input15
[    3.455643] asus_wmi: Number of fans: 1
[    3.540971] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 242
[    3.754672] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
[    3.754702] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17
[    4.119885] NVRM: Your system is not currently configured to drive a VGA console
[    4.119887] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[    4.119887] NVRM: requires the use of a text-mode VGA console. Use of other console
[    4.119888] NVRM: drivers including, but not limited to, vesafb, may result in
[    4.119889] NVRM: corruption and stability problems, and is not supported.
[    4.321038] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    4.325889] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    4.333247] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    4.341197] systemd-journald[309]: Received request to flush runtime journal from PID 1
[    4.424962] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    4.586161] audit: type=1400 audit(1508905178.322:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1021 comm="apparmor_parser"
[    4.586635] audit: type=1400 audit(1508905178.326:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1018 comm="apparmor_parser"
[    4.586638] audit: type=1400 audit(1508905178.326:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1018 comm="apparmor_parser"
[    4.586640] audit: type=1400 audit(1508905178.326:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1018 comm="apparmor_parser"
[    4.586642] audit: type=1400 audit(1508905178.326:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1018 comm="apparmor_parser"
[    4.586854] audit: type=1400 audit(1508905178.326:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1022 comm="apparmor_parser"
[    4.587040] audit: type=1400 audit(1508905178.326:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1017 comm="apparmor_parser"
[    4.587043] audit: type=1400 audit(1508905178.326:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1017 comm="apparmor_parser"
[    4.587942] audit: type=1400 audit(1508905178.326:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1026 comm="apparmor_parser"
[    4.687171] cgroup: new mount options do not match the existing superblock, will be ignored
[    5.197603] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.257056] r8169 0000:07:00.0 eth0: link down
[    5.257058] r8169 0000:07:00.0 eth0: link down
[    5.257135] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.703675] nvidia-modeset: Allocated GPU:0 (GPU-a0910fef-6672-3201-558d-d7c8724b758f) @ PCI:0000:01:00.0
[    9.066371] r8169 0000:07:00.0 eth0: link up
[    9.066377] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.866885] audit_printk_skb: 33 callbacks suppressed
[    9.866887] audit: type=1400 audit(1508905183.606:22): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=1686 comm="serial" capability=21  capname="sys_admin"
[    9.877227] usblp1: removed
[    9.878179] usblp 1-11:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x05CA pid 0x0453
[ 1316.691987] usb 1-10.2: reset high-speed USB device number 8 using xhci_hcd
[ 1317.507524] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1317.507527] Bluetooth: BNEP filters: protocol multicast
[ 1317.507532] Bluetooth: BNEP socket layer initialized
Mais en fait c'est le dmesg d'aujourd'hui et j'ai éteint le PC cette nuit. J'aurais bien ajouté le /var/log/dmesg.0 mais à ma grande surprise, il date du 14 juillet 2016... C'est bizarre, non? L'emplacement a changé et on ne me l'aurait pas dit? :oops:

Code : Tout sélectionner

$ ls -lah /var/log/dm*
-rw-r----- 1 root adm 58K juil. 14  2016 /var/log/dmesg
-rw-r----- 1 root adm 58K juil. 14  2016 /var/log/dmesg.0
-rw-r----- 1 root adm 16K juil. 13  2016 /var/log/dmesg.1.gz
-rw-r----- 1 root adm 15K juil. 12  2016 /var/log/dmesg.2.gz
-rw-r----- 1 root adm 16K juil. 12  2016 /var/log/dmesg.3.gz
-rw-r----- 1 root adm 16K juil. 11  2016 /var/log/dmesg.4.gz
Je n'éteins plus mon PC jusqu'à nouvel ordre. J'ai quand même lancé la commande que tu m'as donnée, avec un seul tiret. ;)

Code : Tout sélectionner

$ sudo dpkg-reconfigure xserver-xorg
Linux Mint 18.3, Cinnamon 3.6.7, Noyau 4.4.0.104-generic x86_64
CM ASUS Z170-P, CPU i5-6600K, 8GB DDR4
NVIDIA GK107 (GT 740), pilote nvidia, Ecran HP Envy 32'' QHD
DD SanDisk SSD 240G (système) + Seagate 320G

Proton88
Messages : 8
Enregistré le : sam. 21 oct. 2017 09:58
Localisation : Darnieulles (88150)
Contact :

Re: Écran noir après chaque mise à jour de noyau

Message par Proton88 »

Bonsoir,

J'ai démarré mon PC fixe ce soir, mais j'ai un écran noir. Pour ne rien toucher, je vous écris depuis mon portable qui démarre bien, lui. Je n'ai plus fait de mises à jour de noyau, je ne fais plus que les mises à jour validées par défaut.
Je peux rebooter depuis la console ctrl-alt-f1, mais si vous avez des idées de choses à me demander tant qu'il est dans cet état, je suis preneur.

Merci d'avance, et joyeuses fêtes
Linux Mint 18.3, Cinnamon 3.6.7, Noyau 4.4.0.104-generic x86_64
CM ASUS Z170-P, CPU i5-6600K, 8GB DDR4
NVIDIA GK107 (GT 740), pilote nvidia, Ecran HP Envy 32'' QHD
DD SanDisk SSD 240G (système) + Seagate 320G

Proton88
Messages : 8
Enregistré le : sam. 21 oct. 2017 09:58
Localisation : Darnieulles (88150)
Contact :

Re: Écran noir après chaque mise à jour de noyau

Message par Proton88 »

Bonsoir,

Un peu d'eau a coulé sous les ponts, beaucoup même par endroits...
Je suis passé à Mint 18.3, je ne fais plus de mises à jour si elles ne sont pas cochées par défaut, et ce soir j'ai encore eu le même phénomène, écran noir à la place du bureau. Me voici après un reboot depuis la console.
J'ai encore farfouillé dans les forums mais je n'ai pas de piste sérieuse. Après, ce n'est pas très fréquent, je peux vivre avec, c'est surtout que j'aime bien trouver, ça m'aide à dormir :)

Bonne soirée.
Linux Mint 18.3, Cinnamon 3.6.7, Noyau 4.4.0.104-generic x86_64
CM ASUS Z170-P, CPU i5-6600K, 8GB DDR4
NVIDIA GK107 (GT 740), pilote nvidia, Ecran HP Envy 32'' QHD
DD SanDisk SSD 240G (système) + Seagate 320G

Slyvester
Messages : 29
Enregistré le : mer. 15 juil. 2015 15:08

Re: Écran noir après chaque mise à jour de noyau

Message par Slyvester »

Bonjour,

Peut-etre utilises-tu les pilotes propriétaires NVIDIA et non le pilote Nouveau Xorg ? Il faut savoir - si c'est ton cas - qu'il faut repasser en pilotes non propriétaires (= Nouveau Xorg) lorsque tu passes/changes à/vers un Kernel/noyau supérieur, faute de quoi tu te retrouves avec des problèmes comme ceux que tu rencontres ... (et dont je souffre depuis l'arrivée de LM 18!).
En ce qui me concerne, je tourne sous Linux Mint 18.3 Cinnamon 64 BIT avec le noyau 4.4.0-109-generic. D'après les forums en français comme en anglais, les noyaux 4.11.* et 4.13.* sont à éviter lorsqu'on a une distribution comme celle que nous utilisons et donc dotée de NVIDIA.
Tu dois donc repasser impérativement sous pilotes non propriétaires Nouveau XORG et repasser à un noyau inférieur : 4.4.0-109-generic ou 110 ...
J'attends l'arrivée de Ubuntu 18 LTS pour me débarasser définitivement de Linux Mint 18 Cinnamon avec laquelle j'ai des problèmes depuis le passage de LM 17 à LM 18.
Une autre solution pour éradiquer ce foutu problème de carte graphique NVIDIA est d'installer Linux Mint 18.3 XFCE en lieu et place de Linux Mint 18 Cinnamon !
3 X PACKARD-BELL "DIMENSION E520" : Trois distributions Linux en multiboot : SparkyLinux 7 Bullseye ("sid/unstable")(LXQT)+ Lubuntu 20.04 LTS (LXQT) + Manjaro Linux (LXDE
+ P.C. portable épouse : NoteBook Packard-Bell ENLG718M-C2ZX + Windows 10 Famille 64 Bits, processeur x64, version 1809.
+ P.C. portable ACER ASPIRE ES1-132-CGLG + Windows 10 Pro 64 Bits.

Avatar du membre
tyrry
Messages : 5606
Enregistré le : mar. 21 juil. 2015 07:42
Localisation : à l'ouest

Re: Écran noir après chaque mise à jour de noyau

Message par tyrry »

Slyvester a écrit :Une autre solution pour éradiquer ce foutu problème de carte graphique NVIDIA est d'installer Linux Mint 18.3 XFCE en lieu et place de Linux Mint 18 Cinnamon !
Mouahahaha c'est même pas moi qui l'ai dit :l :l
oui ok :arrow: :arrow: :arrow: :arrow:
@+
Desktop: LXDE Distro: Debian 12 Bookworm
Kernel: 6.1.0-18-amd64 Drive: Intel Nvme 240
CPU: Ryzen 3 PRO 2200GE RAM: 16 go Graphics Card: AMD ATI Radeon Vega Series

Avatar du membre
arghlub
Administrateur du site
Messages : 10421
Enregistré le : dim. 21 mai 2017 08:19
Localisation : Provence
Contact :

Re: Écran noir après chaque mise à jour de noyau

Message par arghlub »

:l :l :l (je sors aussi) :arrow: :arrow: :arrow:
Tour1 (custom)CM MSI Z270 M3 | CPU Intel I7-7700K | CG Nvidia GTX 1080 | RAM 16Go | tripleBoot : Debian 11 | MXlinux 21 | LMint 19.3 | XFCE
Tour2 (custom)CM Gigabyte | CPU AMD Athlon 5200+ | CG Nvidia GTX 560 | RAM 6Go | FreeBSD 12.1 XFCE
Portable1 MSI GF75 Thin 9SC | CPU Intel I7-9750H | CG Nvidia GTX 1650 | RAM 32Go | dualBoot : LMint 20.2 | MXlinux 21 | XFCE
Portable2 MacBook Air A1466 (2015) | CPU Intel I5-5250U | CG Intel HD Graphics 6000 | RAM 8Go | dualBoot : macOS Sierra | MXlinux 21 XFCE
─────( pour une informatique libre ! -membre en stand-by de l' April.org────────────────

Répondre